[NEVER USED] 100CM Silicone Shower Barrier, Self-Adhesive Anti-Overflow Shower Threshold Bar, Shower Water Dam, Shower Threshold Water Dam, Foldable Shower Barrier for Bathroom Floor-Black

Product never used, packaging damaged during transport. Unopened product, repackaged in our warehouses, in perfect working condition, warranty available.【Tips】 1. Once the shower barrier is installed, it is recommended to evenly coat the edges with silicone sealant (the product does not contain silicone sealant) to make the shower barrier more durable and waterproof. 2. After installation, the shower barrier should be left in place for 30 hours. Do not allow water to soak through the water retention strip. Wait until the silicone sealant has hardened before use. 【Multifunctional】 Our shower barrier can be used on the floor or sink, installed on the outer edge of the countertop, and in the space between the countertop and wall to solve the problem of dirt entering the gap (1-10 mm), water leaking and dripping, and water leaking from the countertop. Dry separation and wetness can reach the counter, making it easy to move. [Applies to multiple scenarios] The foldable shower barrier is well suited for all smooth floors and countertops, such as kitchen countertops, sinks, bathroom doors, bathroom corners, bathtub edges, sinks, window sills, balconies, the edge of washing machines, and the bottom of toilets. An anti-leak barrier that is effectively waterproof and keeps floors and countertops clean and well-tucked away. 【High-quality silicone material】 The shower threshold is made of environmentally friendly, elastic silicone. The surface is soft and smooth. The silicone material is waterproof and wear-resistant, easy to clean, not easy to discolor and deform, heat-resistant and frost-proof, and suitable for all seasons. The shower threshold and restraint system come with a self-adhesive backing, which has strong adhesion and won't fall off easily. 【Easy to Install】When installing the shower barrier, the floor or countertop should be free of water and dust, otherwise the shower barrier will impair the adhesive effect of the adhesive. You can cut the required length with a knife, then tear off the adhesive and apply it to the surface, and finally press it into shape. (If you need to make a bend, it is recommended to first cut the shower enclosure smoothly at a 45-degree angle and then connect it at a 96-degree angle, which is more stable and durable.)