[NEVER USED] 10A Wireless Lighting Switch – Easy-to-Install RF Transmitter and Receiver, Compatible with Lamps Up to 1500W

Product never used, packaging damaged during transport. Unopened product, repackaged in our warehouses, in perfect working condition, warranty available.

【Superb Design】 433MHz RF Wireless Light Switch. No wiring required between the lights and the switch. Stable and reliable performance with high receiving sensitivity (-97dBm). Radio frequency signal transmission. A strong signal can penetrate walls, floors, doors, panels, etc. It can be controlled from up to 50 meters away in an open space.

【Easy to Use】 The wireless switch can be mounted with double-sided tape or screws. You can turn the device on/off from anywhere using the wireless switch. It is a standard 86-type switch.

【Easy to Install】 The mini receiver measures 47*42*23 mm. It is installed between the power supply and the device. It can be easily hidden in most electrical boxes or junction boxes, or it can also be screwed onto a circuit board. You can easily install it to control lights or outlets. No wiring is required.

【Multiplayer Control】 Each receiver can store approximately 10 wireless switches. This allows you to share switches with your family. Everyone can remotely control the device corresponding to their receiver. One transmitter can also control multiple receivers. For example, one switch installed on the wall next to the bedroom door and another placed on the bedside table.

【Quality Assurance】 High-quality relay with a lifespan of over 400,000 uses. This receiver uses a 10-amp relay, which can handle high-power electrical devices. The receiver is suitable for AC voltages of 85V to 250V, so AC 110V/220V/230V is OK.

【High-Quality Switch】 The wireless switch can withstand over 500,000 clicks. It requires a 12V 27A battery and can operate for approximately 5 years. The battery is replaceable after removal.

【More Flexibility】 Extremely easy to set up and reset. You can easily add additional wireless switches yourself as needed.

Product Parameters

DieseRC Wireless Switch

Operating Voltage: AC 85V ~ 250V

Maximum Current: 10A

RF Frequency: 433 MHz

Encoding Support: 1527 Learning Code

Receiving Sensitivity: 97dBm

Operating Temperature: -30 ~ +80℃

Receiving Range: Approximately 20 meters indoors

Standby Current: 5mA

Relay Receiver Size: 47 * 42 * 23 mm

Wireless Switch Size: 86 * 86 * 13 mm

Package includes

RF Relay Receiver

Wireless Switch (battery included)

1x Product Manual

How to Program

Press the button on the wireless switch, the light will turn on; press the button again, the light will turn off.

Programming

Press the learning button (on the receiver) twice. Wait 3 seconds;

Press a button on the wireless switch. Successful.