[NEVER USED] 10m x 5cm anti-slip adhesive tape with luminous film that glows in the dark, safety tape for stairs, ladders, and slippery floors, indoor and outdoor use.

Product never used, packaging damaged during transport. Unopened product, repackaged in our warehouses, in perfect working condition, warranty available.

BRIGHT REMINDER: The strip with a green fluorescent film will glow in the dark, making it easy to highlight stairs and preventing tripping on the last step at night.

ADD GRIP TO PREVENT SLIP: The tape is made from 80-grit aluminum oxide, creating superior and durable traction on slippery areas. This eliminates the worry of slipping and makes you feel safer going up and down the stairs.

DURABLE AND RESIDUE-FREE ADHESIVE: The high-quality adhesive resists cracking and peeling. When you need to replace or reposition it, it leaves no residue and won't damage your flooring.

SUITABLE FOR REACH: Ideal for highlighting stair nosings and hazardous steps.

Such as loading dock edges, basement stairs, movie theater stairs, bunk bed ladders, garages, and all other potentially hazardous areas.

APPLY SIZE: Easy to install and use, simply peel off the stick and unroll the bubbles; Size: 50mm wide x 10m long, Luminous.

Specification

Main material: gravel, paper, strong adhesive, fluorescent

Applicable temperature: 14-140°C / -10-60°C

Suitable for: flat, clean, smooth, and hard floors or surfaces (e.g., floors, stairs, steps, corridors, ramps, vehicle steps, fire escape ladders, scaffolding, cinema aisles, etc.)

Not suitable for: rough, soft, damp, dusty, or porous floors

HOW TO USE?

Ensure contact surfaces are flat, clean, and dry when applying.

Cut the tape to the desired length and round the corners with scissors.

Peel the Remove the backing paper and place it in the desired location. (When the temperature is low, gently heat it with a hairdryer and smooth it down for best results.) Apply pressure evenly from the center of the strip to both ends. (The applied strip has been left to dry for 24 hours.) Place the strip over a light source for a while so that it glows in the dark. Tips: The strip absorbs light for 15 to 20 minutes. The light source can remain bright for a while. (The more light is absorbed, the brighter and longer-lasting the glow will be, eventually fading gradually.) If the glow is dim, don't worry, it will be quite bright immediately after being exposed to light.