[NEVER USED] 15m hose unclogging kit for Kärcher high-pressure cleaners with nozzle and swivel nozzle, professional 180 bar drain auger kit with adapter for Karcher K2/K3/K4/K5/K6/K7 accessories, AA

Product never used, packaging damaged during transport. Unopened product, repackaged in our warehouses, in perfect working condition, warranty available.

General Description The 15m pipe unclogging kit is designed for Kärcher high-pressure cleaners. It includes a high-pressure cleaning hose, a nozzle, a swivel nozzle and an adapter, providing an effective solution for unclogging pipes and drains. Technical Specifications Hose Length: 15 m Maximum Operating Pressure: 180 bar Maximum Operating Temperature: 60 °C Inlet: M22 IT (internal thread) Outlet: 1/8" AG (external thread) Inner Diameter: 14 mm End Fitting Thread: M22 x 1.5 Compatibility and Accessories Compatible with Kärcher K2/K3/K4/K5/K6/K7 HDS pressure washers. Also works with other brands such as Kranzle, Robyi, Honda, etc. Package Contents: 1 x 15 m drain cleaning hose, 1 x Karcher M22 adapter, 1 x nozzle, 1 x swivel nozzle, 1 x PTFE tape Installation Unfold the high-pressure hose and extend it before use. Connect the fitting to the corresponding pressure washer gun. Use Use the nozzle with 3 rear nozzles at 33 degrees to clean and rinse debris from drain pipes. The swivel nozzle with 1 nozzle A 0-degree angle helps eliminate blockages. Other information: The inner tube is made of thermoplastic polyester. The reinforcement layer consists of a high-strength polyester mesh. The top layer is made of thermoplastic polyurethane, providing resistance to weathering, oil, abrasion, and ozone. Note: Should only be connected to a pressure washer, not directly to a tap. Due to manual measurement, dimensions may have an error of 2 cm / 1 inch. Colors and sizes may vary slightly depending on monitors and angles.