[NEVER USED] 3pcs 433.92 MHz Universal Copy Radio Remote Control Keychain RF Transmitter for Clone Garage Door Opener 433 MHz Duplicator

Product never used, packaging damaged during transport. Unopened product, repackaged in our warehouses, in perfect working condition, warranty available.

?Great Design?RF 433 MHz universal wireless remote control. It is a duplicator that can clone other remote controls. A strong signal can penetrate walls, floors, doors, panels, etc. It can be controlled within 50 meters in open area.

?Wide coding range?2260,2262 (such as PT2262, SC2262, HS2262, LX2262, HX2262, etc.), 1527 (EV1527, HS1527, HX1527, SC1527, GP1527, CP1527, AD1527, SCL1527, TL1527, ZX1527) PT2264, PT2240 (LX2240, LX2241, SCL2240), CS5211, SMC918, AX5026, SMC926, 3, AX5326-4, HT600, HT680, HT6207, HT6010, HT6012, HT6013, HT6014, HT12D, HT46N00F49E, different PIC chip manufacturing has different chip model prefixes, everything will be fine as long as the chip model numbers are the same.

?Easy to use? Three conditions must be confirmed before purchase. ?The original remote control works normally.?The frequency should be 433.92 MHz. ?The chip code (encoder chip) as shown. Not all remote controls can be copied. This copy remote control can only copy part of the remote control.

?More flexibility? There are 4 buttons on the remote control, which means you can clone 4 buttons. Each button works independently. The clone remote control can be reset and configured without limitation.

?Wide application? The products can be used in homes, farms, factories, offices, laboratories, supermarkets, etc. With the "Copy Remote Control" function, you can clone many remote controls. such as garage doors, electric gates, rolling doors, extension doors and electric curtains, fans, lamps, lighting, ventilation devices, signal transmission, and so on.

</

Package includes:

3x Clone Remote Controls

Product Manual

Parameters:

- RF Frequency: 433 MHz</

- Battery: 1x 27A 12V (included)

- Button: 4 buttons

- Transmitter range: More than 50 meters in open space

Please confirm three conditions before purchasing.

1: The original remote control works normally.

2: The frequency: 433.92 MHz.</

3: The code of the chip (encoder chip) as below shown

2260,2262,1527, PT2264, PT2240 (LX2240, LX2241, SCL2240), CS5211, SMC918, AX5026, SMC926 , AX5326-3, AX5326-4, FP527, HT600, HT680, HT6207, HT6012, HT6013, HT6014, HT12D, HT46F49E, PIC16F630, ULN2003

Reset:

Hold down buttons "A" and "B" at the same time --- The LED flashes three times. Then release the "B" button (meanwhile, the "A" button is still pressed) and click the "B" button three times --- the LED flashes and then goes out. Successful cloning.

Programming

1. Place the original remote and the cloner remote in the "back-to-back" position. Make sure they are in direct contact. Either the two remotes should be placed as close as possible (place both remotes side by side on the desk, with no gap).

2. Press and hold a button on your original remote, then press and hold a button on your cloner's remote. Continue holding until the LED flashes 2 times (Note: LED 2 flashes to prevent the button from being released). Then it will flash 3 times and then remain solid, and you have successfully cloned.

If for some reason the clone does not flash more than 2 times, it means the signal is not being passed through. Please move the remote control slowly up and down until you reach the point where it is forwarded.