[NEVER USED] BM580 12V Car Battery Tester, 100-2000 CCA Car Battery Analyzer, Car Alternator Tester, Motorcycle, ATV, SUV, Boat Charging and Starting System Tester

Product never used, packaging damaged during transport. Unopened product, repackaged in our warehouses, in perfect working condition, warranty available.

🔥【Essential Garage Tool】BM580 Battery Tester checks and reports the condition of 6V/12V battery types, including: Regular Flood, AGM Flat, AGM Spiral, Gel Battery, and EFB. Accurate test results are available in 3 seconds. (Note: Products sold already have the latest firmware; no upgrade is necessary.)

🔥【4 Test Functions】①Battery Health Test—Indicates if the battery is in good working condition; ②Start Test—Checks if the electrical system has enough power to start the engine; ③Charging System Test—Checks the alternator/rectifier diode/if the charging current is normal; ④ Load Test - Check if the battery has sufficient charge capacity to power all electrical equipment.

🔥【Plug and Play】The BM580 Battery Tester is compatible with all kinds of 6V and 12V batteries, ranging from 100 to 2000 CCA, or 2AH to 200AH. For small motorcycles, ATVs, boats, and other batteries, there is an ultra-low capacity detection mode (2AH), allowing lower capacity batteries to be accurately detected and reported. Most other battery testers do not have this feature.

🔥【2.4-Inch Color LCD Screen and 10 Language Support】The BM580 Battery Tester features a built-in 2.4-inch color LCD screen (320 x 240 pixels) that is easy to read. Each inspection provides a more enjoyable visual experience. 10 languages supported - English, Spanish, French, German, Italian, Japanese, Russian, Portuguese, Chinese, and Polish. If you are unsure whether the BM580 is suitable for your car, please contact us. 🔥【Intelligent Battery Positive and Negative Terminal Identification】The BM580 battery tester has the special function of intelligently identifying the positive and negative battery terminals. The tester will operate independently of the battery's "+" and "-" connections. It is more convenient to use, and there is no need to worry about damaging the battery tester due to an incorrect copper clip.