[NEVER USED] Chimney Insert Seal, Self-Adhesive Braided Gaskets for Stove, Chimney, Stove Tube, Oven Door, Heat Resistant Sealing Gaskets (3mm x 20mm x 2m)

Product never used, packaging damaged during transport. Unopened product, repackaged in our warehouses, in perfect working condition, warranty available.

• ✅【Gasket Size】 Thickness x Width x Length. This is the meaning of our style name numbers. Please select Braided Sealing Gasket according to this data.
• ✅【Easy to Use】 LANUCN gasket is self-adhesive. It is covered with a layer of heat-resistant double-sided tape, easy to install without adding other adhesives. Clean and dry the surface, peel off the protective film, stick it, wait for 12 hours, done!
• ✅【Upgraded Durable + Airtight Performance】 Benefit from the fiberglass rope material and craft improvements, LANUCN stove glass seal is tested up to 600°C heat resistant and no smoke leakage.
• ✅【Widely Application】 Almost all smokers and ovens can use it, such as stoves, ovens, fireplaces, grills, smokers, stove tube, chimney, etc.
• ✅【Important】 1. The temperature of direct fire is much higher than 600°C, so do not let it directly touch the fire or be over 600°C. 2. When used on a vertical facade, a component for fixing the sealing rope is required, otherwise additional seal adhesive must be added for reinforcement.

Product Description

LANUCN Fireplace Insert Gasket

After a long period of use of the fireplace, the fireplace door gasket will more or less have the problem of smoke leakage. Here is our solution for this, quick and easy.


Features:

Improve craftsmanship, no smoke leakage.

Self-adhesive, easy to use.

600℃ extreme durability.

Long-time service.


Scope of application:

Almost all fireplaces and ovens can use it, such as stoves, ovens, fireplaces, grills, wood stoves, flue pipes, chimneys, etc..


Instructions:

1.Clean and dry the surface.

2.Peel off the protective film.

3.Stick it on the right place, wait for 12 hours.

4.That's it!


Important tips:

1. The temperature of direct fire is much higher than 600°C, so do not let it directly touch the fire or be over 600°C.

2. When used on a vertical facade, a component for fixing the sealing rope is required, otherwise an additional joint adhesive must be added for reinforcement.