[NEVER USED] DC 12V Programmable Temperature Controller -50-110℃ Red/Blue LED Display Monitor Heating/Cooling Thermostat Control Module with 10K NTC Waterproof Sensor Probe
You may also like
Compare with similar items
Product information
Description
Product never used, packaging damaged during transport. Unopened product, repackaged in our warehouses, in perfect working condition, warranty available.
Temperature measuring range: -50 to 110 °C (-58 to 230 °C) ℉; Resolution: 0.1 °C at -9.9 to 99.9 and 1 °C between other temperatures; Update rate: 0.5 s
Dual-color LED display: The temperature controller monitors the instrument and displays the measured temperature (red) and the set temperature (blue) at the same time. Can be used in cooling/heating mode to test the indoor or outdoor temperature.
Waterproof Design: The NTC probe (10K 0.5%) is waterproof, and you can control the temperature as you like. You can also control heating or cooling according to your needs.
Reliable in Use: The electronic temperature control switch module has been tested for consistency and reliability. Its control accuracy is 0.1 degrees Celsius. The response accuracy is 0.1 degrees Celsius with high temperature protection.
Wide Range of Applications: The electronic thermostat can be widely used in intelligent household and industrial appliances, household appliances, automatic irrigation, office machinery, sound, automobiles, fish tanks, aquariums, etc.
Temperature Setting:
Press the Set button for five seconds to enter the main setup menu and press STC(+) and C/F(-). to switch to P0 - P8.
Press the STC button and the LED flashes. Press the STC(+) and C/F(-) buttons to reach the set temperature, and wait 3 seconds before the module automatically saves the settings and exits.
Index:
The light is on and the relay is closed; the lamp goes out and the relay switches off.
LED indicator:
Red: Measured temperature; Blue: temperature setting
LLL: indicates that the sensor is on
Hhh: indicates that the temperature is outside the module's measuring range
: indicates that the module is protected against high temperatures. Introduction to the programmable thermostat (code, description, setting range, factory setting):
P0, Heating/Cooling, H/C, C
P1, returns the difference, 0.1-30.2
P2, set maximum limit, + 110,110
P3, set minimum limit, - 50, - 50
P4, correction temperature, - 15 - + 15.0
P5, delayed start, 0 - 10.0
P6, high temperature alarm, - 50 - + 110, off
P7, C/F, CS/FH, CS
P8, factory reset, ON-OFF, OFF
Features
- BrandODIPIE
- ColourBlue
- Power sourceCorded
- OriginMade in China
- Thermostat typeProgrammable
Thermostat buying guide
'/%3E%3C/svg%3E)
'/%3E%3C/svg%3E){kind=small}