[NEVER USED] Remote control for roller shutters, compatible with Somfy Keytis 2, 4 RTS, Keygo, Telis 433 MHz

Product never used, packaging damaged during transport. Unopened product, repackaged in our warehouses, in perfect working condition, warranty available.

Please note that this is a compatible remote control and not an original product.

Frequency: 433 MHz.

Channels: 4.

Battery: Alkaline 12 V / 27 A.

Compatible list (RTS only):

Keytis NS 2 RTS / Keytis NS 4 RTS.

Keytis 2 RTS / Keytis 4 RTS.

Keygo 4RTS.

Telis 1 RTS / Telis 4 RTS.

Telis Soliris 1 RTS / Telis 4 Soliris RTS.

Telis 1 Modulis RTS / Telis 4 Modulis RTS.

Compatible with similar receivers and gate openers: AX24ns, AC230ns, Axovia, Elixo, Ixengo, Axorn, AxRoll, Passeo, Dexxo, FreRoll, Oximo RTS, Orea RTS, Altus RTS, LT CSI RTS.

Black Keytis programming.

1. Open the receiver case. It is located near your motor.

2. Press the Prog 1 programming button on the receiver board until the

L1 LED on the receiver lights up.

3. Press a button on your new remote control. Then release. The LED on the receiver will flash and then go out.

4. Wait 10 seconds. Your new remote control is programmed.

White Telis programming with hidden button.

1. Press the hidden button on the original remote control for 2-3 seconds.

2. On the new remote control, press buttons 1 and 2 simultaneously for about 1-2 seconds, then press button 4 for 1-2 seconds. Your remote control is now ready for use.

Contents: 1 remote control.