[NEVER USED] Roll Waterproof Self Adhesive Sealing Tape, Bathroom and Kitchen Tape, Sealing Tape, Self Adhesive Wall Sealing Tape, Kitchen, Toilet, Shower, Bathroom (White), 3.2 x 38 mm

Product never used, packaging damaged during transport. Unopened product, repackaged in our warehouses, in perfect working condition, warranty available.

Size: Color: white. Size: length 3.2m * width 3.8cm. Material: The sealing strip is made of high-quality waterproof PE material, which has waterproof properties and permanent adhesive, which is better than traditional PVC. It is an environmentally friendly, non-toxic product for families. It is resistant to water, moisture, mildew, oil, acids and alkalis, corrosion and heat. Applicable at different angles, wide range of uses: Bathroom tape with folds in the middle is easy to adapt to any corners, bathtubs, sinks, shower rooms, toilet floors, sinks, corner joints, window sills and other moisture-sensitive cracks, blind spots and the sealing around white paint has never attracted attention.< /li> Easy to use: clean the surface and keep it dry. Special installation tool: just remove the adhesive tape and press it onto the surface in a few minutes. It can be cut to the required length. It can be bent 90 degrees when installing and fits right-angled walls.

Product Description

Specification:

Material: PVC

Weight: 370g

Color: White

Length: 3.2 meters

Width: 38mm

Scope of delivery: 1 x white shower seal

Self-adhesive sealing tape:< /b>

✔ The sealing tool is suitable for all kinds of sealing work on edges, corners and joints.

✔ Waterproof PE bathtub sealing strip, waterproof, moisture-proof, mildew-proof, oil-resistant, acids and alkalis, corrosion, Heat.

✔ Adapted to your needs, flexible and practical.

✔ Use on the kitchen countertop to avoid grease. Use it in the bathtub to keep the corners dry.

✔ Permanently sealed, making the kitchen and bathroom look perfect. Prevent dust, insects and oil from entering the dark corners of the wall, making your corners easier to clean.

Cleaning method

1. Clean the surface and make sure it is dry.

2. Heat with a hair dryer to achieve better viscosity.

3. It can be applied to any smooth surface such as ceramic tiles, marble, glass or painted wood.

4. After installation, press the bar firmly and wait about 8-10 hours.

Note: The data is all manual measurement, please allow 1-3cm error due to the difference in light and display, it would cause color difference. Please refer to the actual item you received.