[NEVER USED] Sdre-RSC2 433MHz Remote Control for Ecostar RSC2 and RSE2 Gates, Compatible with 433MHz Rolling Code Models ECOSTAR RSC2, RSE2 RSZ1 Garage Door Remote Control (2-Pack)
You may also like
Compare with similar items
Product information
Description
Product never used, packaging damaged during transport. Unopened product, repackaged in our warehouses, in perfect working condition, warranty available.
Sdre-RSC2 433MHz Remote Control for Ecostar RSC2, RSE2 Gates. Compatible with 433MHz Rolling Code ECOSTAR RSC2, RSE2, and RSZ1 Garage Door Remote Controls (2-Pack)
433MHz Rolling Code Garage Door Remote Control Replacement for 433MHz ECOSTAR 433.92MHz 4-Channel Remote Control - It is only compatible (not a clone) with the same function as the original remote control.
The ECOSTAR RSE 2 transmitter is compatible with the following models: Ecostar RSC2, Ecostar RSE2, Ecostar RSZ1
You must have access to the motor's control unit and use the motor's instruction manual to add it to the radio receiver's memory.
STANDARD PROGRAMMING: 1 - Press the transparent programming button located under the ECOSTAR motor for 1 second.
The small indicator light on the motor flashes slowly. 2 - Press and hold button (A, B, C, or D) on your new remote control for 2 seconds. The indicator light on the motor flashes more rapidly. 3 - Press and hold the same button on your new remote control for 2 seconds. The indicator light on the motor flashes very rapidly and then turns off. Your new remote control is now programmed.Features
- BrandOTHERS
- MaterialPlastic
- ColourBlack
- Motorization useFor gate
- Motorisation accessory typeRemote-control
'/%3E%3C/svg%3E){kind=small}