[NEVER USED] Shutter remote control, compatible with Somfy Keytis 2, 4 RTS, Keygo, Telis 433 MHz

Product never used, packaging damaged during transport. Unopened product, repackaged in our warehouses, in perfect working condition, warranty available.

Please note this is a compatible remote control, not an original product.

Frequency: 433 MHz.

Channels: 4.

Battery: 12 V / 27 A alkaline.

Compatible list (RTS only):

Keytis NS 2 RTS / Keytis NS 4 RTS.

Keytis 2 RTS / Keytis 4 RTS.

Keygo 4RTS.

Telis 1 RTS / Telis 4 RTS.

Telis Soliris 1 RTS / Telis 4 Soliris RTS.

Telis 1 Modulis RTS / Telis 4 Modulis RTS.

Compatible with similar receivers and gate openers: AX24ns, AC230ns, Axovia, Elixo, Ixengo, Axorn, AxRoll , Passeo, Dexxo, FreRoll, Oximo RTS, Orea RTS, Altus RTS, LT CSI RTS.

Black Keytis programming.

1. Open the receiver case. It is near your engine.

2. On the receiver board, press the Prog 1 programming button until the

LED L1 lights up on the receiver.

3. Press a button on your new remote. Then release. The LED light on the receiver will flash then turn off.

4. Wait 10 seconds. Your new remote control is programmed.

White Telis programming with hidden button.

1. Press the hidden button for 2-3 seconds on the original remote.

2. Press buttons 1 and 2 on the new remote for about 1-2 seconds at the same time, then press button 4 for 1-2 seconds. Your remote control is now ready to operate.

Contents: 1 remote control.