[NEVER USED] Two-Way Solenoid Valve - for Washing Machine, Automatic Washing Machine Inlet Valve, Dishwasher Solenoid Valve, European Drum Accessory (G3/4)

Product never used, packaging damaged during transport. Unopened product, repackaged in our warehouses, in perfect working condition, warranty available.Rated input voltage: AC220-240V Interface: G3/4" Frequency: 50/60Hz Insulation class: Class F Environmental conditions: Ambient temperature -10℃~60℃; relative humidity not more than 95% (ambient temperature is 25°C) Starting characteristics: When the power supply voltage is 85% of the rated voltage and the test water pressure is 0.02-0.80 MPa, the water inlet valve should be able to start normally. Vibration test: Fix the water inlet valve on the vibrating table, and the water inlet valve should be able to start normally after 10 minutes of vibration on each of the three axes with a full amplitude of 3mm and a vibration frequency of 22Hz. Flow characteristics: Connect the water inlet valve to the pressure-regulating water source. Apply a rated voltage under the specified water pressure for 1 minute, which must meet the requirements of the customer's drawings. Electrical rigidity; Use high-voltage test equipment with a voltmeter accuracy of at least 5%, the leakage current is within 0.5 mA, and the conductive part and the mounting hole are in place. Continuously electrify; When the water inlet valve does not supply water, continuously electrify it at the rated voltage for 12 hours and monitor it with a voltmeter. The valve body must not deform and the coil must not burn out. Insulation resistance check; Measure with a 500 V megger or insulation resistance tester with an error of no more than ±5%, and the insulation resistance between the conductive part and the exposed non-conductive part should be greater than 100 MΩ.