[NEVER USED] Voltmeter Ammeter 12V DC 6.5-100V 20A, Voltage Meter Wattmeter Tester Voltage Current Power Energy Digital LCD Energy Meter DC20A

Product never used, packaging damaged during transport. Unopened product, repackaged in our warehouses, in perfect working condition, warranty available.

【4-in-1 Multimeter】This digital DC voltmeter ammeter is used to measure voltage, current, electric energy and active power of electrical appliances. Passed CCC, FCC and CE certification. [Measurement Range] Voltage test range: 6.5~100V DC, Current test range: 0~20A, Active power: 0~2KW, Test range: Electric energy: 0~9999kWh. Please do not exceed the rated parameters. 20A only suitable for short loads, but not for continuous use. If the continuous power exceeds 15A, it is recommended to upgrade to the 50A version. [More Functions] Large LCD screen with backlight; Voltage alarm function; Energy reset function; Data storage when power off; Built-in shunt, no external shunt required. 【Wide Application】This DC voltmeter is suitable for indoor use and cannot be used outdoors. Can be used to monitor batteries, solar systems, electric bicycle generators and other fields. The load cannot exceed the rated voltage and current. 【Package】Package: 1 * DC Multimeter, 1 * User Manual. Note: Please connect according to the wiring diagram we provide. If you want to try other connection, please contact us first. Otherwise, incorrect connection may cause product burnout or malfunction.

Product Description

It has the function of measuring electrical parameters (voltage, current, active power, electric energy).

Voltage alarm function (overvoltage alarm threshold, backlight and flashing voltage when alarming).

Energy key reset function.

Save data in case of power failure.

Large LCD screen (simultaneous display of voltage, current, active power and power)

Backlight function.

</

Backlight control Press this button to turn the backlight on or off. Save the backlight status when power off. Power reset Press and hold the button for 5 seconds until the button is released after the number flashes, press the button again, the power value will be cleared and the reset flashing state will be exited. If you do not want to clear, press and hold the button again for 5 seconds until the number stops flashing, this indicates that the electric energy value has not been cleared, the state will be exited. Voltage alarm reset Press and hold the button until the electric energy is displayed in the “SET” area, “SET” is displayed, release the button. The "SET" area displays the current high voltage alarm value, the current area displays the current low voltage alarm value, and the last digit starts flashing. Press the button to adjust the value, no operation within 3 seconds will automatically change the number, then press the button to adjust the value. Voltage alarm threshold setting range: 6.5V to 99.9V. After setting, press and hold until the screen displays "PASS".

Learn more

Wiring diagram

Notes:

This module is for indoor use, please do not use outdoors.

The applied load must not exceed the rated voltage and current

The wiring order must not be wrong.