[NEVER USED] Wireless Indoor and Outdoor Thermometer, 2-in-1 Clock, LCD Thermometer ℃ / ℉, Digital Indoor/Outdoor Thermometer, Clock, Temperature Measurement with Transmitter

Product never used, packaging damaged during transport. Unopened product, repackaged in our warehouses, in perfect working condition, warranty available.

【100 m long-distance transmission】: Indoor thermometer. With the handheld transmitter, you can measure the outdoor temperature of the sensor and transmit it within 100 m without obstacles.

【12/24 hours, ℃ / ℉ switchable】: Wireless for indoor use, outdoor thermometer, 12H/24H format, temperature unit ℃/unit for selection. Can be placed on the table or hung on the wall.

【Wireless technology】: Indoor and outdoor thermometers use wireless technology, you can determine the outdoor temperature in the indoor receiver.

【Indoor and outdoor temperature comparison】: Record the maximum indoor and outdoor temperature and display the indoor/outdoor temperature simultaneously.

[Rear bracket design]: Outdoor connected indoor thermometer. Can be placed on the table or hung on the wall.

Function:

Clock function, indoor temperature, outdoor temperature, storage of minimum/maximum temperature values.

Size: Main unit: 150 x 86 x 20, sub-unit: 130 x 40 x 21

Temperature function:

Ø Indoor temperature detection range: 0 °C to 50 °C (32 °F). to 122°F)

Ø Outdoor temperature detection range: -30°C–70°C (-4°F–158°F)</

Ø Indoor temperature detection cycle: half a minute

Ø Outdoor temperature detection synchronization cycle: 1 minute

ØResolution: 1°C/1°F

Time setting mode:

Ø In standard mode, long press the "SET/°C/°F" button to enter the time setting mode

Ø The set item flashes at a frequency of 1 Hz

Ø The setting sequence is: 12/24 → Hour → Minute → Offset → Output

Ø Set the result and press the "SET/°C/°F" button to confirm.

Ø Press "+/MAX/MIN". Pressing the button once increases the set value by one step. If you hold this button for more than 2 seconds, the set value increases at a rate of 8 steps per second.

Ø If the button is not pressed within 2 seconds, the setting mode will be automatically exited after approximately 30 seconds and the set value will be saved.

Product list: 1 master unit, 1 slave unit (Note: Battery is not included).