Nitrogen Gas Spring for Press and Die, Series 320, Compressed Cylinder - Model YX320-025

Features:1.The upper part of the nitrogen gas spring cylinder has a C-shaped notch that meets ISO standards, and the bottom has a screw hole for easy installation.
2.The initial spring pressure of the YX320 series nitrogen gas spring is 3200N, with a long stroke and stable operation.
3.The piston rod has high hardness after fine machining, and the surface roughness reaches approximately Ra0.02µm.
4.The gas spring cylinder body uses an integral cutting and forming process to ensure its safety and stability.
5. The diameter of the nitrogen gas spring cylinder body is 24.9 mm, the piston diameter is 15 mm, and it offers strong adaptability.
Specifications:Item Type: Nitro Gas Spring
Material: Alloy
Purpose: Compression Nitro Cylinder
Cylinder Diameter: Approx.24.9 mm/1 in
Piston Diameter: Approx.15 mm / 0.6 in

Package List:1 x Nitro Gas Spring
1 x Storage Box

Note:1.Do not use the piston rod of the nitrogen gas spring for fastening, and the threaded hole at the end of the piston rod cannot be used as a lifting hole. Do not modify the following aspects of the nitrogen gas spring: (1) Drill holes in the nitrogen gas spring cylinder block, sealing ring, etc. (2) Shorten the piston rod to reduce the stroke. (3) Do not perform any other treatments on the nitrogen gas spring and its accessories.Do not use nitrogen gas springs for purposes outside the scope of the product catalog specifications.Do not allow the ammonia gas spring to return freely after being compressed, as this will damage the internal structure.