Non-isolated boost power supply module for 10V-60V DC input voltage

Specifications: Output current: 18 A max. Please increase heat dissipation if the current exceeds 10 A (this depends on the potential difference between the input and output; the greater the potential difference, the lower the output current). Input reverse polarity protection: Yes (150 A MOS circuit breaker). Deep discharge protection: Yes (adjustable voltage from 9 to 50 V). Operating temperature: -40 °C to +85 °C (please increase heat dissipation if the ambient temperature is too high). Efficiency: 92% to 97% (efficiency depends on the input and output voltage and current, as well as the potential difference; the lower the potential difference, the higher the efficiency). Note: The maximum power is 240W for a 12V input voltage, 480W for a 24V input voltage, and 720W for a 36V input voltage. Specifications: Material: PCB Dimensions: Approx. 13 x 5.3 x 5.2 cm Module Model: BT07CCCV-A Type: Non-isolated Boost Module (BOOST) Input Voltage: 10-60V DC (direct 10-60V input without voltage selection jumper) (updated 05/15/2016) Input Current: 20A (MAX), a fan is recommended for heat dissipation (with a 12-24V input voltage, the input current can reach 25A) Static Operating Current: 15mA (when the output voltage changes from 12V to 20V, the static current increases with the output voltage) Frequency Operating frequency: 150 kHz Constant current range: 0.5-18 A (+/- 0.3 A) Note: Please allow 1-2 cm error due to manual measurement. Due to differences in monitors, the actual color of the item may differ slightly from the color shown. Package includes: 1 x 1200W Boost Constant Current Module