Non-Slip Self-Adhesive Bathroom Floor Covering Pink 60x500 cm

Adhesive flooring for bathroom, pink with star pattern, waterproof and non-slip, roll 60 cm x 5 m

This self-adhesive flooring is designed to easily refurbish an indoor floor without major work. Suitable for the bathroom, toilet or other damp rooms, it can cover an old floor while providing a neat finish that is visually soft and practical for everyday use. Its pink pattern with small stars creates a subtle and decorative atmosphere, ideal for modernising a space without replacing the existing flooring.

Thanks to its laminated surface, this floor film offers good resistance to moisture, daily wear and friction. The thickened structure improves comfort in use and helps provide better durability over time. Its self-adhesive backing makes installation easier on a smooth, clean and dry surface.

Key features

• Adhesive flooring ready to install
• Waterproof surface suitable for damp rooms
• Non-slip finish for added safety
• Thickened structure for better wear resistance
• Practical solution for floor renovation without major building work
• Roll format easy to cut as needed
• Decorative pink star pattern, suitable for modern interiors

Recommended use

This adhesive floor covering is particularly suitable for spaces where moisture and water splashes are frequent. It can be used to refresh an old floor, protect a surface or improve the appearance of a small room. It naturally fits in a bathroom, toilet, utility room, washbasin area or any other indoor area requiring a simple-to-maintain covering.

• Bathroom
• Toilet
• Utility room
• Secondary entrance
• Small spaces to refurbish quickly

Product features

The covering is made from a flexible laminated material, designed to combine grip, waterproofing and easy maintenance. The visible side has a texture suited to floor use, with a non-slip function that is useful in wet rooms. The roll can be cut with a craft knife or scissors to fit the dimensions of the area to be covered, corners or the outline of sanitary fittings.

The self-adhesive installation allows faster fitting than traditional flooring. Once the surface has been prepared correctly, application is carried out progressively to limit air bubbles and achieve an even finish. This type of covering is appreciated for light renovation projects, both in a main home and in rental properties, when a simple, clean and economical solution is required.

Technical parameters

• Product type: adhesive flooring in roll form
• Main function: renovation and protection of indoor flooring
• Design: pink with star pattern
• Finish: laminated, waterproof
• Properties: non-slip, wear-resistant, thickened structure
• Roll dimensions: 60 cm x 5 m
• Approximate covered area: 3 m²
• Specified thickness: approximately 0,35 cm according to the information provided
• Net weight: 0,7 kg
• Format: 1 roll
• Fixing method: self-adhesive
• Compatible rooms: bathroom, toilet, other smooth indoor floors
• Maintenance: simple cleaning with a soft cloth or a slightly damp mop

Installation and use advice

To achieve good adhesion, it is recommended to lay this covering on a smooth, dry, clean surface free from dust and grease. If the floor has significant irregularities, joints that are too deep or marked defects, prior preparation is recommended. Unroll the product, take the necessary measurements, then cut precisely before final installation.

• Clean and dry the floor thoroughly before application
• Check that the surface is flat and stable
• Cut the roll to the desired dimensions
• Gradually remove the protective film from the adhesive
• Smooth from the centre towards the edges to expel air
• Avoid immediate exposure to high moisture just after installation

To extend the service life, it is advisable to avoid overly aggressive cleaning products and abrasive tools. This self-adhesive flooring is a practical solution for modernising a space quickly while keeping everyday maintenance simple.

Package contents

• 1 roll of adhesive flooring
• Roll dimensions: 60 cm x 5 m
• Colour: pink star pattern