Non-Slip Self-Adhesive Bathroom Flooring Green 60x500 cm

Self-adhesive floor covering for bathrooms, toilets and wet areas

This green self-adhesive floor film with a star pattern is designed for the quick renovation of floor surfaces in wet rooms. Practical and attractive, it allows you to cover an old floor covering without major work. Its laminated finish helps protect the surface against everyday moisture, while its non-slip appearance improves comfort of use in a bathroom, toilet or utility room. This 60 cm by 5 m roll is perfectly suited to small and medium-sized surfaces to be modernised.

Product highlights

• Self-adhesive floor covering, easy to install
• Water-resistant laminated surface suitable for wet rooms
• Non-slip finish for greater everyday safety
• Thickened version for better hold and good wear resistance
• Quick renovation solution without removing the existing floor
• Subtle and decorative green star pattern, easy to blend into different interior styles
• Practical roll format for custom cutting

Ideal use

This floor sticker is suitable for many domestic spaces where a solution that is both functional and decorative is required. It can be used to renovate an old floor, hide small visual imperfections or protect a surface exposed to water splashes. Thanks to its integrated adhesive, it is easier to install than a conventional floor covering and does not require complex tools.

• Bathroom
• Toilet
• Utility room
• Secondary entrance
• Washbasin area
• Small indoor traffic areas

Product features

This adhesive floor covering has been designed to meet common indoor renovation needs. Its laminated structure provides an additional barrier against surface moisture. Its reinforced thickness improves installation comfort and limits wear linked to repeated foot traffic. The self-adhesive side makes application easier on a clean, dry and smooth surface. The green pattern with a star effect adds a soft visual touch, while remaining easy to match with modern, natural or functional interiors.

The non-slip property is an important advantage in areas where the floor may be exposed to splashes. This type of covering is particularly sought after for bathrooms and washrooms, as it combines aesthetic renovation, easy maintenance and installation accessible to a wide audience.

Technical parameters

• Product name: laminated adhesive floor covering
• Product type: self-adhesive floor sticker for indoor renovation
• Brand: not specified
• Model: green star pattern, thickened non-slip and wear-resistant version
• Main function: renovation and protection of flooring in wet rooms
• Main features: self-adhesive, waterproof, non-slip, thick, wear-resistant
• Material: laminated material, exact composition not specified
• Colour: green
• Pattern: fragmented stars
• Dimensions: 60 cm x 5 m per roll
• Length: 500 cm
• Width: 60 cm
• Stated thickness: 0,35 cm
• Net weight: 0,7 kg
• Stated weight: 700 g
• Installation: self-adhesive application
• Application areas: bathroom, toilet, indoor floor, domestic wet areas
• Voltage: not applicable
• Power: not applicable
• Capacity: not applicable
• Compatibility: flat, clean, dry and smooth surfaces

Installation and usage advice

To obtain a clean and long-lasting result, it is recommended to prepare the surface carefully before installation. The floor must be dry, dust-free, degreased and as smooth as possible. An uneven surface may reduce adhesion or make defects visible after installation. Measure the area to be covered, cut the covering to the required dimensions, then gradually remove the adhesive backing film during application. Smooth it down as you go to avoid air bubbles.

• Clean the floor thoroughly before installation
• Check that the surface is completely dry
• Cut with a suitable craft knife for a precise finish
• Apply gradually, smoothing from the centre towards the edges
• Avoid immediate exposure to high humidity after installation
• Do not install on a crumbly, very rough or permanently damp surface

For routine maintenance, gentle cleaning with a damp cloth or a slightly wrung-out mop is generally sufficient. It is advisable to avoid overly aggressive products in order to preserve the surface finish for longer.

Package contents

• 1 roll of adhesive floor covering
• Roll dimensions: 60 cm x 5 m
• Colour: green star pattern

This self-adhesive floor covering for bathrooms and toilets is a practical solution for quickly renovating an indoor floor without undertaking major work. Its roll format, waterproof surface and non-slip finish make it a suitable choice for everyday domestic use, while improving the visual appearance of the room.