Non-Slip Self-Adhesive Floor Sticker Bathroom Grey 60x500 cm

Self-adhesive bathroom flooring with mountain grey stone effect

This self-adhesive flooring in roll format is a practical solution for quickly renovating an indoor floor without major work. Designed for wet rooms such as the bathroom or toilet, it combines a waterproof surface, self-adhesive installation and an enhanced non-slip finish. Its mountain grey stone effect design provides a simple and modern look, easy to integrate into a contemporary, classic or minimalist interior.

Thanks to its 60 cm x 5 m roll format, this floor film allows you to cover a large surface with a single piece, while limiting visible joins. It is perfectly suited to modernising an old floor, protecting an existing covering or improving the appearance of a small room at lower cost.

Product highlights

• Simple and quick self-adhesive installation
• Waterproof surface suitable for wet rooms
• Non-slip finish for greater everyday safety
• Thickened structure for better wear resistance
• Elegant mountain grey stone effect design, easy to match
• Ideal solution for floor renovation without complex building work

Recommended use

This self-adhesive flooring is suitable for many domestic uses. It can be installed in a bathroom, toilet, utility room or any other indoor room requiring practical flooring that is moisture-resistant and easy to maintain. It is particularly suitable for covering an old surface during a decorative refresh, as part of a rental renovation or a quick fitting-out project.

It can be used on a smooth, clean and dry floor. For a long-lasting result, the surface must be even and free from dust, grease or major irregularities. This type of covering is appreciated for small spaces where clean, quick and visually uniform installation is required.

Product characteristics

• Self-adhesive roll flooring
• Floor protection and renovation function
• Waterproof design for indoor use in a humid environment
• Anti-slip surface to reduce the risk of slipping
• Reinforced thickness for better hold and increased resistance
• Good abrasion resistance for domestic use
• Easy maintenance with routine cleaning
• Can be cut to suit the room dimensions

Technical parameters

• Product name : Waterproof non-slip self-adhesive flooring
• Product type : Roll floor sticker for interior renovation
• Design : Mountain grey stone effect
• Colour : Grey
• Finish : Non-slip, wear-resistant, thickened version
• Roll dimensions : 60 cm x 5 m
• Approximate covered area : 3 m²
• Stated thickness : 0,35 cm
• Net weight : 0,7 kg
• Product length : 500 cm
• Product width : 60 cm
• Height or thickness : 0,35 cm
• Weight : 700 g
• Installation method : Self-adhesive
• Intended use : Indoor floor
• Application areas : Bathroom, toilet, sanitary area, indoor rooms

Installation and usage advice

Before installation, it is advisable to clean the floor carefully in order to remove all traces of dust, moisture, soap or grease. The surface must be dry, stable and as smooth as possible. Measure the area to be covered, cut the roll to the desired dimensions, then gradually remove the adhesive backing film during application.

To avoid the formation of air bubbles, it is recommended to smooth the covering as you go during installation, from the centre towards the edges. In wet rooms, particular attention should be paid to corners and edges. It is preferable to avoid prolonged exposure to standing water on the edges of the covering. For maintenance, cleaning with a soft cloth or a slightly damp mop is sufficient in most cases.

Package contents

• 1 roll of self-adhesive flooring
• Roll dimensions : 60 cm x 5 m
• Design : mountain grey stone effect

This bathroom and toilet flooring is a functional solution for renovating an existing floor with a clean and up-to-date finish. Its non-slip texture, waterproof surface and self-adhesive system make it a suitable choice for users looking for a balance between appearance, practicality and ease of installation.