Normally open current detection switch SZC23-NO-AL-CH CA 0.2-30 A Adjustable current monitoring relay, miniature current switch Corridor sensors

Features:

1. Self-powered, no external power source required.
2. Operating range: 0.2-30 A AC, adjustable via the power meter.
3. The LED indicator shows the operating state of the switch in a practical and intuitive form.
4. Electronic switch without contact with MOS tube of high power.
5. The interrupter does not have a limit of aperture and light, and it does not respond to any alarms.

Specification:

The AC current sensor switch of the SZC23 series is designed and manufactured to resolve AC current monitoring problems. Use the mutual inductance principle to detect continuous alternating current (CA), send it and emit a switching signal normally switched off or normally closed to directly control various industrial automation equipment, such as intermittent lights, switches, relays, single-chip devices or other equipment with them. electric charger. In comparison with traditional mutuos inductors, thermal protectors and other devices, this device does not allow a more precise and rapid control, although it also simplifies the design considerably and reduces the costs.

Features:
1. Self-powered, no external power source required.
2. Operating range of 0.2-30 A AC, adjustable via the power meter.
3. The LED indicator shows the operating state of the switch in a practical and intuitive form.
4. Electronic switch without contact with MOS tube of high power.
5. The switch does not have a limit of lights and lights, and it does not respond to the ms level.
6. Direct structural design, electrical voltage supported from up to 2000 V.
7. The resistance is less than 1% and can be used in strong magnetic conditions.
8. The exterior casing is made of self-extinguishing ABS material.
9. Suitable for medicine and AC power monitoring, protection against overcharging of AC motors, electronic switching to automatic control systems, etc. 240V AC/DC
Input current: 0.2-30A AC
Minimum ignition: 0.5 ± 0.2A
Maximum current: 100%
Flight current: ≤0.1A
Precision: 1%
History: 1%
Timing Respuesta: 200ms
Repetibility: 100%
Operation temperature: -20~60°C
Waterproof: IP30
Dimensions: 65*25*47mm / 2.56 x 0.98 x 1.85 pounds
Diameter of the hole: 10 mm / 0.4 pounds
Package weight: aprox. 56 g / 2.0 oz

Package list:
1 * Corridor detection switch

Note:
1. Due to the difference between monitors and lighting effects, images may not reflect the actual color of the item.
2. You may have a small margin of error due to the medication manual. Thanks for your understanding.