NOVOFERM NOVOTRON 504 MAX43-4 Remote Control (3 pieces)

General Description This NOVOFERM NOVOTRON 504 MAX43-4 remote control is an easy-to-program transmitter operating on a frequency of 433.92 MHz. It is designed for use with several NOVOFERM receiver models and requires access to the receiver for programming. Technical Specifications Frequency: 433.92 MHz Operating Voltage: CR2032 (battery included) Transmission Distance: 25 to 50 m in open space Decoder IC: Rolling Code Item Condition: New Type: Third-party remote control (not manufactured by NOVOFERM) Compatibility and Accessories Compatible with the following models: NOVOFERM MCHS43-2 NOVOFERM MTR43-2 NOVOFERM MNHS433-02 NOVOFERM MNHS433-04 NOVOFERM NOVOTRON 502 MAX43-2 NOVOFERM NOVOTRON 504 MAX43-4 NOVOFERM NOVOTRON 512 MIX 43-2 NOVOFERM MINI-NOVOTRON 522 NOVOFERM MINI-NOVOTRON 524 NOVOFERM MINI-NOVOTRON 522 Design NOVOFERM MINI-NOVOTRON 524 Design Receiver access required Installation Programming Instructions: Open the case from your receiver located next to your motor. On the receiver's circuit board, press and release the programming button (ENR, MEMO, PROG, REC depending on the model). The receiver's LED indicator will light up or flash. Press a button on your new remote control for 1 second, then release it. The receiver's LED light will turn off immediately or within the next 10 seconds, depending on the model. Your new remote control is now programmed. Usage: The remote control's range may vary depending on interference. In open spaces, the range is optimal, but obstacles such as walls or trees can significantly reduce the transmission distance. Other information: Included: 1 x remote control, 1 x battery, 1 x key ring, 1 x instruction manual in English