Nuclear Radiation Detector Geiger Counter X-ray Tester β γ Radiation Dose Alarm with Battery

1. MAIN PURPOSE: Portable nuclear radiation detector with high accuracy and sensitivity, measuring from 0.08µSv to 50mSv, can be used to monitor X-rays, beta rays, and gamma rays.
2. GOOD PERFORMANCE: Selected high-performance microprocessor and equipped with a TFT2.0 color screen, easy to use and with less interference.
3. ALARM METHOD: Arbitrary combination of audible and flashing alarm methods, and the alarm threshold can be arbitrarily set; when the threshold is reached, an alarm will be emitted in a timely manner.
4. MULTIPLE FUNCTIONS: With real-time monitoring, automatic alarm self-checking and fault detection against the standard, supports synchronization measurement, which can be arbitrarily set between 00 and 999 hours.
5. APPLICABLE SCENS: Widely used in home renovation radiation monitoring, nuclear laboratories, petrochemicals, geological surveys, radiation dose monitoring, and personal protection.

Specification:

Item Type: Nuclear Radiation Detector.
Model: PTL816
Material: ABS
Battery: 3.7V 1500mAh Rechargeable Lithium Battery (Built-in Battery)
Application: Nuclear Radiation Detection Alarm
Scope of Application: Home renovation radiation monitoring, radiation treatment companies, health and epidemic prevention, radiotherapy, nuclear laboratories, nuclear power plants, import and export product inspection, building materials, petrochemicals, geological surveys, scrap metal and steel, industrial non-destructive testing, etc. Under the environment of ionizing radiation, situations of supervision and protection of personal radiation dose.
Sensor: GM meter tube
Measurement range: 0.08 µSv–50 mSv
Measurement accuracy: -17%–+25% based on 137CsY
Battery life: 20 days (continuous measurement, no particle noise)
Charging interface: TYPE-C interface (green LED is always on while charging, off when fully charged)
Alarm response time Td: deviation from alarm threshold: -17% to +25%
Function:
1. Dose rate is measured in real time and the cumulative dose is recorded simultaneously.
2. With calibration function.
3. The dose rate alarm threshold and the dosage alarm threshold can be set arbitrarily (continuous adjustment).
4. The start time of the current dose accumulation can be viewed.
5. With the time measurement function, it can be set arbitrarily between 00 and 999 hours.
6. With an overdose alarm function.
7. Historical data for the last 10 measurements can be recorded.
8. With the calendar clock function, it can ensure normal clock operation after a power outage.
9. The battery level is continuously monitored with a battery level icon.
10. Free switching between Chinese and English menus.
11. With a sensor failure prompt function (the display indicates that the device is damaged).
12. When the recorder is on and the screen is off, if it detects that the radiation dose exceeds the set alarm value, the monitor will automatically trigger an alarm. It will automatically switch to the radiation measurement page.
1. Start:
When the instrument is off, press and hold button II for 3 seconds to complete the startup process. The main interface will be displayed after startup.
2. Turn off:
Press and hold button II for 3 seconds to complete the shutdown process.Note: If the lock icon appears at the top of the screen, it cannot be disabled. If it is disabled, please go to the Timer Measurement page and click to stop the timer. This will stop the timer and turn it off.
3. Radiation Measurement
The instrument enters the main interface. Click on Radiation Measurement to display the instantaneous value, average value, cumulative dose value, and cumulative measurement time.
4. Time Measurement
Enter the Measurement Synchronization menu to set the start delay (can be set from 00-99 hours) and the measurement duration (can be set from 00-999 hours). Click to start the timer. The device begins a countdown. When the start-up timer countdown returns to zero, the average instantaneous value and the cumulative dose over time are simultaneously reset. The device then begins counting the radiation dose and the cumulative dose rate. After the measurement timer countdown, the device automatically stores the interval measurement data. The measured data can be found in the history log. Note: The start-up timer is the countdown to begin the measurement, which can be set in hours, minutes, and seconds. Click to start the timer measurement to enter the countdown, and the countdown will finish to start the measurement.

Package List:

1 detector

1 data cable

1 tool kit

1 lanyard

1 user manual