Ø 40 mm clamp of fastening,FamlTol 10 Pieces clamp of tightening hose 2 holes clamps of tightening Improved For the fastening of hoses sturdy

Size and quantity : Package included 10 x Clamp of Fastening, Thickness : 1.3 mm, Width: 19 mm, diameter of the hole of fitment : 12 mm x 8.5 mm, Suitable for the diameter of the tube of fitment : Ø 40 mm.

design reinforced : clamp tightening stainless steel thickness able to reach 1,3 mm ; the clamps of fastening are stainless steel 304, resistant to of temperatures high going up to 800°C and to low temperatures up to -196 °C, suitable to systems of tuyauterie requiring a resistance high to the temperature and to a load relatively important, can provide a support of fastening reliable.

Structure of nervures renforcees : the flange of fastening are designed in a only piece by emboutissage, bending and cutting in U, this which reinforced all particularly the design of nervures, increase thus the resistance and the performance anti-deformation. This design allows also a better distribution and absorption of different constraints and vibrations.

Fields use : these clamps of fastening s'appliquent widely for fix of hoses the soil, to ceiling and to wall outdoor. They can be used for the fastening of driving of heat such as the hoses water hot, of steam, power in water and of heating, as well as the systems of sprinklers, in the systems of tuyauterie to high temperature.

Method installation : select the size of clamp suitable the diameter outdoor of the hose, determinez the positions of holes in function of diameters of holes and of location of the clamp, then tighten the screw. You can place a fine washer of material flexible between the clamp and the hose for reduce the vibrations and the noise.