OBD2 car scanner, vehicle diagnostic tool, OBDII reader (French version): Read and clear engine fault codes to easily identify engine problems

The V310 OBD II/EOBD barcode reader is suitable for all OBD-II compliant vehicles, including those with the next-generation CAN (Control Area Network) protocol. The U.S. Environmental Protection Agency (EPA) mandates that all cars and light commercial vehicles sold in the U.S. from 1996 onwards, as well as all updated passenger cars, must comply with the OBD-II standard. This applies to all domestic, Asian, and European vehicles. A few gasoline-powered vehicles from model years 1994 and 1995 also meet the OBD-II standard. To check if a 1994 or 1995 vehicle is OBD-II compliant, check the VECI (Vehicle Emission Control Information) label, which is located under the hood or next to the radiator on most vehicles. OBD-II compliant vehicles will display "OBD II Certified" on this label. Furthermore, government regulations stipulate that all OBD-II compliant vehicles must be equipped with a 16-pin universal data link connector (DLC). For your vehicle to be OBD-II compliant, it must have a 16-pin DLC (Data Link Connector) on the underside, and the vehicle's emissions control plate must confirm OBD-II compliance. The V310 Code Reader supports various vehicle makes. Features of the V310 Barcode Reader: 1. Supports various vehicle makes, suitable for all US, European, and Asian vehicles that comply with OBDII standards from 1996 onward. 2. Supports multiple languages: English, French, Italian, Spanish, German, and Dutch. 3. Supports hotkey queries (VIN, DTC). 4. Supports reading/clearing diagnostic trouble codes, I/M readiness, vehicle information, check engine light (MIL) deactivation, etc.

5. Displays current sensor data, including:

6. Engine speed

7. Calculating load value

8. Coolant temperature

9. Fuel system status

10. Vehicle speed

11. Short-term fuel trim

12. Long-term fuel trim

13. Intake manifold pressure

14. Ignition timing

15. Intake air temperature

16. Airflow rate

17. Absolute throttle position

18. Oxygen sensor voltage/associated short-term fuel trim

19. Fuel system status

20. Fuel pressure

Technical data V310:

Display: Badit, 128 x 64 pixels

Operating temperature: 0–60 °C (32–140 °F)

Storage temperature: -20–70 °C (-4–158 °F)

External power supply: 8.0 to 15.0 volts, supplied by the vehicle battery