OBD2 Economy Fuel Saver NitroOBD2 Full Chip Tuning Box for Cars and Petrol Cars (Yellow)

1. The NitroOBD2 is a plug-and-drive device for economical fuel consumption reduction and low emissions. 2. It is easy to install and plugs directly into the car's OBD2 connector. The NitroOBD2 is suitable for all models from 1996 onwards. 3. The NitroOBD2 can improve engine performance. 4. Its operating principle is based on the OBD2 protocol to remap the car's ECU. After driving 200 km, the NitroOBD2 adjusts the car according to the driver's driving habits, remaps the ECU to increase engine performance, and prevents unnecessary power loss. 5. NitroOBD2 uncovers your car's hidden power: up to 35% more horsepower, up to 25% more torque. Specifications: NitroOBD2: blue and red; NitroOBD2 Gasoline: green and yellow. Features: low fuel consumption and low emissions. Installation and Calibration: 1. Insert the car key. 2. Locate your car's OBD2 connector and insert NitroOBD2. 3. This step is crucial: reverse the car key. (Do not start the car.) 4. Press and hold the NitroOBD2 reset button for approximately 5 seconds. After releasing the button, wait approximately 30 to 54 seconds (NitroOBD2 will communicate with the ECU to establish a connection). 5. Start the engine. 6. NitroOBD2 will recognize your car and driving habits. After approximately 200 km/150 mph, nitroobd2 will adjust itself to perfectly match your car's fuel-efficient settings. User Manual