On/off relay module with adjustable cycle timer (DC12V, 0-120 min)

Features:1.This is a time-delay relay module with high-precision, stable, and reliable performance.
2.Supports two modes: single-use (mono) mode and cycle mode. You can easily switch between modes by adjusting the jumper.
3.Connect two "key" wires if you need the module to operate repeatedly after power-up.
4.There are multiple voltage and time ranges to choose from. The "on" and "off" times are adjustable.
5.Widely used in timer operating equipment, machine repetitive test circuits, aquarium intermittent pumps, etc.
Specifications:Features:
This is a time delay relay module with high-precision, stable, and reliable performance.
Supports 2 modes: mon (one-time) mode and cycle mode. You can easily switch between modes by adjusting the jumper.
Connect 2 "Key" wires if you need the module to operate repeatedly after power-up.
There are many voltage and time ranges to choose from; the "on" and "off" times are adjustable.
Widely used in timer operating equipment, repetitive machine test circuits, intermittent aquarium pumps, etc.
Specifications:
Type: DC5V, 0-30min/DC5V, 0-24hr/DC12V, 0-120min/DC12V, 0-24hr/DC24V, 0-15min/DC24V, 0-30min (Optional)
Quiescent current:
Dynamic current: 45mA@12V; 90mA@5V; 30mA@24V
Contact: 1 group NO+NC
Load Capacity: 10A (AC0-250V, DC0-30V)
Size: 70*20*18mm / 2.75*0.78*0.7"
Time Accuracy: maximum value * 0.001
Monitor Mode::
1. The module is powered on. When triggered, the relay is activated, and the timer is deactivated.
2. When triggered during the delay process, it will immediately interrupt the delay.
Cycle Mode:
1. The module is powered on. When triggered, the relay is activated. (T1) Timer delay is deactivated. (T2) Timer delay is activated.Such cycles T1 and T2 are defined respectively by two adjustable resistors.
2.When triggered on the delay process, and triggered again, it will immediately interrupt the delay.
The package includes: 1 x time delay relay module