One roll of blackout window film, one-way vision, self-adhesive, black, 45 x 200 cm

Color: Black (Viewed from the inside, appears black from the outside)

Product Overview

Privacy Protection: This one-way window film preserves your privacy during the day. The lighter side creates a mirror effect, while the transparent side allows you to see outside without being seen. (Viewed from the inside, appears black from the outside)

Note: Always close the curtains at night.

Thermal Insulation: Its reflective properties reduce heat coming through the windows.

This one-way window film blocks 99% of UV rays and 85% of heat, protecting your skin from UV damage.

Preserves natural light: Slightly reduces brightness but significantly attenuates temperature differences, preventing unwanted views.

Easy installation: This one-way window film is non-stick after being sprayed with water, making it easier to install compared to adhesive films. Its adhesion returns to normal once the water dries, providing better adhesion than non-adhesive films.

Different effects day and night: At night, when the interior light is stronger than the exterior light, people outside can see inside. Remember to close the curtains at night.

Package contents: 2 sheets of window film.

Installation steps:

1. 1. Measure the length of the window, leaving a margin of approximately 2 cm when cutting. 2. Clean the window. 3. Spray the window liberally with water; the more water, the better the adhesion. 4. Read the warnings before installation and remove the protective film from a smooth surface. 5. Use a squeegee to remove water and air bubbles from top to bottom and left to right. 6. Cut the film along the edge of the window and use a squeegee and a utility knife to ensure it covers the edge completely.