OPCOM 2012V USB Interface Diagnostic Tester with CAN OBD2 Operator Firmware V1.99, Black

It provides complete status information (current, absent, temporary); You can print, save, or copy fault codes to any other application; From the fault code menu, you can directly access the measurement block menu. Display fault information from multiple control modules. Can display 8 measurement parameters simultaneously; The sampling rate largely depends on the communication protocol. 1. Covers almost all Opel vehicles, including new cars with CAN-BUS diagnostic function, such as the Vectra-C, Astra-H, and Zafira-B.2. The program allows you to read and clear fault codes, display real-time data, and perform output tests. 3. The program supports many control units, such as: For example, engine, automatic transmission, ABS, airbag, engine cooling module, instrument cluster, electronic climate control, body control unit, etc. 4. Since Opel uses multiple pins in the OBD connector, the diagnostic interface acts as a multiplexer and selects the appropriate pin for communication. PIN3, PIN7, PIN8, PIN12 = serial connection (ISO9141, KW81, KW82, KWP2000). 5. The error code is displayed with all available information: Full description of the error code text: 1) Complete status information (present, not present, present, flashing) 2) You can print, save, or copy the error codes to any other application. From the error code window, you can directly access the measurement block window. 3) The program displays measurement information for blocks on many control modules, which you can select from the list. 4) The program can display 8 measurement block parameters simultaneously. The sampling rate largely depends on the communication protocol. For example, older systems like Omega-B-2000 and the latest CAN-based system control unit are very fast!   You can also run output tests on multiple controllers. PIN6-PIN14 PIN3-PIN11 PIN1 HSCAN – High-speed, 2-wire CAN bus, 500 kbps MSCAN – Medium-speed, 2-wire CAN bus, 95 kbps SWCAN – Low-speed, 1-wire CAN bus, 33.3 kbit/s Package List: 1 OP COM connector 1 USB cable 1 PC x Software and Driver CD Note: Only Win XP and Win operating systems 7 32-bit systems are supported; other systems are not supported.