OPCOM 2012V USB Interface Diagnostic Tester with CAN OBD2 Operator Firmware V1.99, Black

It provides complete status information (current, absent, temporary);

You can print, save, or copy fault codes to any other application;

From the fault code menu, you can directly access the measurement block menu.

Display fault information from multiple control modules.

Can display 8 measurement parameters simultaneously;

The sampling rate largely depends on the communication protocol.

1. Covers almost all Opel vehicles, including new cars with CAN-BUS diagnostic functionality, such as the Vectra-C, Astra-H, and Zafira-B. 2. The program allows you to read and clear fault codes, display real-time data, and perform output tests.

3. The program supports numerous control units, such as: For example, engine, automatic transmission, ABS, airbag, engine cooling module, instrument cluster, electronic climate control, body control unit, etc.

4. Since Opel uses multiple pins in the OBD connector, the diagnostic interface acts as a multiplexer and selects the appropriate pin for communication.

PIN3, PIN7, PIN8, PIN12 = serial connection (ISO9141, KW81, KW82, KWP2000).

5. The error code is displayed with all available information:

Full description of the error code text:

1) Complete status information (present, not present, flashing)

2) You can print, save, or copy the error codes to any other application.

From the error code window, you can directly access the measurement block window. 3) The program displays measurement information for blocks on numerous control modules, which you can select from the list. 4) The program can display 8 measurement block parameters simultaneously. The sampling rate depends largely on the communication protocol. For example, older systems like the Omega-B-2000 and the latest CAN-based system control unit are very fast!

You can also run output tests on multiple controllers.

PIN6-PIN14

PIN3-PIN11

PIN1

HSCAN – High-speed, 2-wire CAN bus, 500 kbps

MSCAN – Medium-speed, 2-wire CAN bus, 95 kbps

SWCAN – Low-speed, 1-wire CAN bus, 33.3 kbps

Package List:

1 OP COM connector

1 USB cable

1 PC x Software and Driver CD

Note: Only 32-bit Windows XP and Windows 7 operating systems are supported; others systems are not supported.