OTDR Fiber Optic Tester 1310/1550nm 26/24dB, 5.5 Inch IPS Touchscreen, OTDR Tester with Built-in OPM, LS, OLS, Event Map, Cable Tester and 8 Fiber Optic Adapters

【RSO-50 OTDR Tester】 This OTDR fiber optic tester offers wavelengths of 1310/1550 nm and a dynamic range of 26/24 dB, with a maximum range of 150 km. In automatic range selection mode: simply select the wavelength and test duration to quickly perform the test. In parameter mode: after setting the range, pulse width, and measurement duration, the test is performed. The curve and map are displayed simultaneously. Note: this mode does not support live testing. The 1610 nm and 26 dB version supports live testing. 【Curve Analysis, Minimum Dead Zones (EDZ and ADZ), and Data Storage】 The OTDR tester automatically analyzes the curve. The touchscreen allows you to zoom and pan the curves. The test results are displayed as a list. This event list clearly indicates the event type, distance, attenuation, dropout, and reflection. It also displays the minimum dead zone (EDZ) of 0.8 m and the attenuation dead zone (ADZ) of 3 m. It is possible to save one or more curve path graphs and generate tracing reports. The files are in PDF/Exceer format (SOR standard).
【OPM LS OLS Tools】OTDR tester with a 5.4-inch IPS touchscreen, 1280 x 720 resolution. Optical power meter: used for optical power testing and relative measurement of fiber optic link losses. Optical Loss Test: Used to test insertion losses in passive optical devices. [Event Map and Cable/Length Tester] The event map enables one-touch automatic testing and graphically displays information such as the length of the fiber optic link being measured, the splice type, and the break point location. Test the connection status of UTP cables and display the results on the screen. Detect fault points at the near, middle, and far ends of RJ45 cable connectors and also test cable shielding. Measure the disconnection position (open circuit) of BNC cables, RJ45 network cables, RJ11 cables, etc. [Power Supply and Battery Performance] The fiber optic tester uses an external power supply with a 5V/2A USB-C interface and provides a 5V/1A output for powering other devices. It features a built-in 3.7V (4000mAh/14.8Wh) lithium-polymer battery offering up to 6 hours of use after a 3.5-hour charge. Compact (18.3 × 11 × 4.1 cm) and lightweight (460 g), the fiber optic tester is easy to carry. It comes with a 12-month warranty and professional customer support for complete peace of mind.