OTDR Fiber Optic Tester 1310/1550nm 26/24dB, OTDR Tester Auto Parameter Setting, OPM, LS, OLS, Event Map, Network and Cable Testing Tools, 8 Types of Fiber Adapters

【RSO-51 Smart OTDR Tester】This fiber optic OTDR tester offers a wavelength of 1310/1550 nm and a dynamic range of 26/24 dB, with a maximum range of 150 km. In automatic range selection mode: simply select the wavelength and test duration to quickly perform the test. In parameter mode: after setting the range, pulse width, and measurement duration, the test is performed. The curve and map are displayed simultaneously. Note: this mode does not support live testing. The 1610 nm and 26 dB version supports live testing. 【Curve Analysis, Minimum Dead Zones (EDZ and ADZ), and Data Storage】The fiber optic OTDR tester automatically analyzes the curve. The touchscreen allows you to zoom and pan the curves. Test results are displayed as a list. This event list clearly indicates the event type, distance, attenuation, dropout, and reflection. It also displays the minimum dead zone (EDZ) of 0.8 m and the attenuation dead zone (ADZ) of 3 m. One or more curve path graphs can be saved, and tracing reports can be generated in PDF/Excel format.
【OPM LS OLS Tools】OTDR tester with a 5.4-inch IPS touchscreen, 1280 x 720 resolution. Optical power meter: used for optical power testing and relative measurement of fiber optic link losses. Optical loss test: used to test the insertion losses of passive optical components.
【Event Map and Network Tools】The event map enables one-click automatic testing and graphically displays information such as the length of the fiber optic link to be measured, the junction type, and the break point location. Powerful network tools help you detect and configure various network settings. Network testing tools: IP address analysis, link monitoring, port connectivity testing, ping testing, LLDP detection of switch ports, PPPoE, and FTP file management. [Cable Tester] Built-in UTP cable tester, RJ45 TDR cable tester, cable length measurement application. Tests the connection status of UTP cables and displays it on the screen. Detects fault points at the ends (near, middle, and far) of RJ45 cable connectors and can also test shielded cables. The RJ45 TDR cable tester can test pair status, length, attenuation, reflectivity, impedance, misalignment, etc. Measurement range: 600 meters (approximately 1,969 feet). Measures the disconnection position (open circuit) of BNC cables, RJ45 network cables, RJ11 cables, etc.