OTDR Fiber Optic Tester 1310/1550nm 28/26dB, Auto/Expert Mode, Event Map, LS OPM OLS, Digital Multimeter, SFP Module, Network Cable Testing, 8 Adapters, 8" IPS Touchscreen

【RSO-85 Intelligent OTDR Measurement】This OTDR fiber optic tester offers a wavelength of 1310/1550 nm and a dynamic range of 28/26 dB, with a maximum range of 150 km. In automatic range selection mode: a single click is all it takes to start the test; simply select the wavelength and test duration to run it quickly. In parameter mode: after setting the range, pulse width, measurement duration, etc., the test is performed. The curve and map are displayed simultaneously. Note: this mode only detects the optical signal and does not support live testing. 【Curve Analysis, Minimum Dead Zones (EDZ and ADZ), and Data Storage】The OTDR fiber optic tester automatically analyzes the curve and allows touch zoom and pan. The results are displayed as a list. This list clearly indicates the event type, distance, attenuation, dropout, and reflection. It also displays the minimum dead zone (EDZ) of 1.6 m and the attenuation dead zone (ADZ) of 8 m. The device supports automatic or manual recording of up to 4 traces simultaneously and the creation of trace reports. Standard SOR file formats (PDF/Excel) are supported. [OPM VFL LS OLS and Wi-Fi Tools] OTDR tester with an 8-inch IPS touchscreen, 1920 x 1200 resolution. Optical power meter: used for optical power testing and relative measurement of optical fiber link losses. VFL: simple and precise location of optical fiber defects. Laser type: Class 2; Power < 1 mW, Wavelength < 650 nm. LS: Wavelength: 1310/1550 nm. Optical Loss Test: Used to measure the insertion loss of passive optical components. Built-in Wi-Fi: Create Wi-Fi access points and analyze the Wi-Fi network. [Event Map, Connectors, and Digital Multimeter] One-touch automatic testing: Graphical display of information such as the length of the optical fiber link to be measured, the junction type, and the break point location. OTDR fiber tester with 8 interchangeable connector types: UPC/FC, SC, LC, ST. 1 FC to FC connector, 1 FC to SC connector, 1 SC to SC connector, 1 FC to LC connector. Digital multimeter: Tool for measuring AC and DC voltage and current, resistance, capacitance, data hold, relative measurement, and continuity testing. [Cable Tester, SFP, and Network Tool] The OTDR tester is also equipped to test UTP cables, measure their length, and perform RJ45 TDR tests. Thanks to its cable tracer, it allows for the rapid location of BNC, network, and telephone cables within a tangle of cables. It performs non-contact voltage detection and PD power testing. It features an interface for SFP fiber optic modules, compatible with Gigabit SFP fiber optic modules. Its network testing tools enable route tracing, link monitoring, DHCP server configuration, port flashing, and ping testing.