OTDR Fiber Optic Tester 1550nm 26/24dB, Fiber Optic Tester Supports OPM, LS, OLS, VFL, Event Map, UTP/RJ45 Cable Testing TDR / Cable Length Tester

【RSO-31 1310/1550 nm 26/24 dB Live Fiber Tester】 This OTDR fiber optic tester features a wavelength of 1310/1550 nm and a dynamic range of 26/24 dB, offering a maximum test range of 80 km. It also supports live fiber testing. In automatic range selection mode, simply choose the wavelength and test duration for quick execution. In parameter mode, the test is performed according to predefined parameters such as measurement range, pulse width, measurement duration, etc., with simultaneous display of waveforms and event maps.
【Wave Analysis, Minimum Dead Zones (EDZ and ADZ), and Data Storage】The OTDR fiber optic tester automatically analyzes the waveform. The touchscreen allows zooming and panning along curves. Test results are displayed as a list. This event list clearly indicates the event type, distance, attenuation, dropout, and reflection. It also displays the minimum dead zone (EDZ) of 1.6 m and the attenuation dead zone (ADZ) of 8 m. It is possible to save one or more curve path graphs and generate tracing reports in PDF/Excel format. [OPM LS OLS Tools] OTDR tester with a 4-inch IPS touchscreen, 800 x 480 resolution. Optical power meter: used for optical power testing and relative measurement of fiber optic link losses. Optical Loss Test: Used to test the insertion loss of passive optical components. 【Event Map and Cable/Length Tester】The event map enables one-touch automatic testing and graphically displays information such as the length of the optical fiber link being measured, the splice type, and the break point location. Test the connection status of UTP cables and display the results on the screen. Detect fault points at the near, middle, and far ends of RJ45 cable connectors and also test the shielding. Measure the disconnection position (open circuit) of BNC cables, RJ45 network cables, RJ11 cables, etc. 【Cable Tester Functions】The UTP cable tester detects the connection status of UTP cables and displays the results on the screen. It also detects short, medium, and long-distance faults on RJ45 connectors and supports testing shielded cables. The RJ45 TDR cable tester measures pair condition and cable length, with a measurement range of up to 600 meters (approximately 1969 feet). The cable length meter detects breaks in network cables, with a maximum measurement length of 3000 meters (approximately 9842 feet). This tester comes with a one-year warranty and ongoing professional technical support.