OTDR Fiber Optic Tester 1610nm 32dB Live Testing, Auto/Expert Mode, Event Map LS OPM OLS Cable Tester, Network Tools, 7" IPS Touchscreen 1280x800, WiFi 8 Styles of Fiber Adapters

【RSO-73 Intelligent OTDR Measurement】This OTDR fiber optic tester offers a wavelength of 1610 nm and a dynamic range of 32 dB, with a maximum range of 150 km. In automatic range selection mode: a single click is all it takes to start the test; simply select the wavelength and test duration to run it quickly. In parameter mode: after setting the range, pulse width, and measurement duration, the test is performed. The curve and map are displayed simultaneously. Note: The 1610 nm mode supports live testing.
【Curve Analysis, Minimum Dead Zones (EDZ and ADZ), and Data Storage】The OTDR fiber optic tester automatically analyzes the curve and allows touch zoom and pan. The results are displayed as a list. This list clearly indicates the event type, distance, attenuation, dropout, and reflection. It also displays the minimum dead zone (EDZ) of 1.6 m and the attenuation dead zone (ADZ) of 8 m. The device supports automatic or manual recording of up to 4 traces simultaneously and the creation of trace reports. Standard SOR file formats (PDF/Excel) are supported. [OPM LS OLS and Wi-Fi Tools] OTDR tester with a 7-inch IPS touchscreen, 1280 x 800 resolution. Optical power meter: used for optical power testing and relative measurement of fiber optic link losses. Optical loss tester: used to test the insertion losses of passive optical components. Built-in Wi-Fi: Create Wi-Fi access points, analyze Wi-Fi
【Event Map, Cable Tester, and Network Tool】The event map enables one-touch automatic testing and graphically displays information such as the length of the fiber optic link being measured, the splice type, and the break point location. Tests UTP cables. Tests RJ45 TDR cables. The cable tracer allows for quick location of BNC, network, and telephone cables among cluttered cables. Performs non-contact voltage detection and PD power testing. The network testing tools enable route tracing, link monitoring, DHCP server testing, port blink testing, and ping testing.
【Battery and Multifunctional Integration】The fiber optic OTDR is powered by a 7.4V lithium-polymer battery (7800mAh, 57.72Wh). It features the Android 10.0 operating system, a 1.6 GHz quad-core processor, 1 GB of DDR RAM, 8 GB of internal storage, and a TF card slot (8 GB TF card included). It includes two Gigabit Ethernet RJ45 ports (10/100/1000 Mbps). It supports PoE detection: connect it to the PSE interface to test the PoE switch type, supply voltage, power mode, etc. Note: PoE power output is not supported.