OTDR Fiber Optic Tester RSO-5500 1310/1550 nm 28/26dB, 5.4 Inch IPS Touchscreen, VFL/OPM/LS/OLS, IP Camera Tester, FC UPC SC ST LC, Event Mapping, Cable Testing

[Intelligent OTDR Measurement] This fiber optic OTDR tester offers wavelengths of 1310/1550 nm, a dynamic range of 28/26 dB, and a maximum test distance of 150 km. Automatic mode: Simply select the wavelength and test duration to start the test with a single click. Parameter setting mode: After configuring the parameters, you can adjust the distance, pulse width, measurement duration, and other settings. The fiber optic tester can simultaneously display traces and maps. Note: This OTDR tester only detects optical signals and does not support real-time testing. [OTDR Analysis and Data Storage] This optical OTDR tester automatically analyzes traces and supports zoom and pan via the touchscreen. Results are displayed in a table showing event type, distance, loss, attenuation, and reflectance. It displays the minimum event dead zone (1.6 m) and the attenuation dead zone (8 m). High measurement accuracy with a linearity of ±0.05 dB/dB, a loss resolution of 0.01 dB, and a loss threshold of 0.05 dB. It stores four traces simultaneously and generates measurement reports in PDF/EXCEL and standard SOR formats. [OPM VFL LS OLS Network Analysis Tool with Wi-Fi] Network analysis tool with a 5.4-inch IPS touchscreen and 1920 x 1152 resolution. The optical power meter (OPM) measures power and relative attenuation. The VFL fiber optic cable tester easily and accurately identifies fiber faults. The LS tests multimode and single-mode fibers for bends and breaks, with a test range of up to 8 km (26,246 ft). The OLS measures the insertion loss of passive optical components. Built-in Wi-Fi enables the creation of Wi-Fi access points and Wi-Fi analysis. [Event Map, Cable Tester, and Network Tools] The event map allows for one-click automated testing and graphically displays fiber length, link type, and fault location. The RJ45 TDR cable test covers up to 600 meters and displays pair status, length, attenuation, and impedance. The UTP test detects faults at both near and far ends. The cable tracer supports 12–1000 V AC for BNC, network, and telephone cables. Network tools include: route tracing, link monitoring, DHCP server, ping test, PPPoE, and LLDP. PoE test (48V/30W) with voltage and link monitoring. [CCTV IP Camera Tester] This IP tester supports testing 4K 12MP 4000x3000P IP cameras and offers standard video display. ONVIF compliant, it provides features such as video viewing, IP address reassignment, channel name reassignment, and test report generation. It enables IP address discovery and automatic network segment analysis. Its 7.4V/2600mAh lithium-polymer battery provides 6 hours of battery life after a 3-hour charge. It runs on Android 10.0 with a multilingual menu. Weight: 460 grams, dimensions: 183 x 110 x 41 mm