Outdoor solar fountain for garden, 2.5W solar bird fountain, lotus-shaped floating pump for pond, pool, garden and yard decoration.

Environmentally friendly: Without batteries or a power supply, the solar fountain activates automatically in 3 seconds under sufficient sunlight. For optimal performance, place it in direct sunlight. The jet height is adjustable from 30 to 70 cm. It is easy to move at no extra cost. Exceptional lifespan: The solar fountain has a lifespan of over 20,000 hours. The pump is equipped with an integrated brushless motor for extended lifespan and low energy consumption. Multifunctional pump: The solar fountain comes with 4 different nozzles, allowing you to adjust the height and shape of the jet to suit your needs. The jet height depends on the intensity of the sunlight. Easy to use: Simply place the fountain in water. Once exposed to sunlight, the pump starts automatically in three seconds. Floating and self-supporting, it can be moved as desired without installing a pump. Refined Garden Decoration: This eco-friendly solar fountain is ideal for bird baths, ponds, aquariums, swimming pools, garden decoration, and water oxygenation. Decorate your garden with this solar pump fountain and give it a touch of originality. Specifications: Material: Monocrystalline silicon; Solar panel: 7V / 2.5W; Pump voltage: 7V DC; Pump current: 135mA; Maximum jet height: 100cm; Maximum flow rate: 180 l/h; Pump lifespan: 20,000 hours; Noise level: [Missing information]. Package contents: 1 solar fountain (accessories included). Performance: Water jet height: 30-70cm (varies depending on the nozzles used). The pump starts within 3 seconds when the solar panel receives sufficient light. Instructions: 1) Assemble the fountain following the diagram. 2) Place the solar panel in an open area. The pump functions correctly when the solar panel receives sufficient light. 3) The presence of air in the pump during the first immersion can affect the jet. It is advisable to wait until the pump is functioning correctly before connecting the nozzle.