Outdoor solar light with motion sensor, 56 LEDs, IP65 waterproof 120° solar garden light with 5m cable

General Description

The outdoor solar lamp is designed with a main body separate from the solar panels, allowing optimal installation in sunny areas thanks to a 5m waterproof cable. With 56 LED beads, it offers powerful lighting and a 120° detection angle to illuminate large spaces at night.

Technical Specifications

Brightness: 300LM

Color Temperature: 7000K

Solar Panel: 5.5V / 180mA

Battery: 3.7V / 1200mAh

Cable Length: 5m

Number of LEDs: 56

Irradiation Area: 12 x 8 cm

Lamp Size: 15cm x 11cm x 2.3cm

Solar Panel Size: 13cm x 11.5cm x 1.5cm

Protection Rating: IP65 (Water and dust resistant)

Compatibility and accessories

The lamp comes with a 5-meter cable and screws for easy wall mounting. No additional wiring is required.

Installation

To install the lamp, follow these steps:

Fix the lamp body at an ideal height of 1.8 to 2.5 m.

Install the solar panel in a sunny location.

Use the screws provided for secure mounting.

Operation

Motion detection: The lamp automatically turns on when motion is detected within a distance of 3 to 5 m.

Lighting time: The light stays on for 30 seconds after motion is detected.

Energy saving mode: When the environment is bright, the lamp switches to charging mode.

The light only operates at night, automatically turning off when there is no motion.

Other information

No switch; It works automatically as soon as it is connected. To test its operation, block the solar panel to simulate darkness.