Outdoor solar-powered anti-intrusion siren alarm with standalone strobe light and loud 129dB sound.

Description:

This outdoor solar siren alarm system, with a 129dB sound and strobe light, is a deterrent to intruders, helping you protect your home.

24 hours with strobe light and alarm; 24 hours with strobe light but no alarm; 12 hours with strobe light and alarm (night mode);

Place the solar panel in sunlight; it will charge automatically during the day.

This solar alarm is IP65-rated water-resistant with a robust casing and can be charged in two ways: via solar DC jack or charger.

Suitable for home security, farms, villas, hotels, markets, guesthouses, and other locations requiring a security alarm.

Features:

Alarm Siren

Color: Red.

Material: ABS.

Size: 9 x 14 cm / 3.54 x 5.51 inches.

LEDs: 8 red LEDs

Waterproof: IP65

Sound Alarm: 129dB

Induction Angle: 125 degrees

Charging time: 10 hours

Solar panel: 5V 120mA x polycrystalline silicon solar panel

Battery: 3.7V x 1200mA lithium-ion

Caution: Please activate the main switch on the back (next to the backup charging port) when you want to use the remote control.

1 * Alarm Siren

Function: First speed day mode (24-hour induction audible and visual alarm), second speed 24-hour silent flashing alarm; Third-speed night mode (no induction during the day, audible and visual alarm in dark conditions), fourth-speed silent flashing alarm mode.

The induction angle is 125 degrees and it fully charges in about 6 hours in sunlight. One charge can be used 24 hours a day, for 30 days, and the battery life is 365 hours.

It is suitable for farms, villas, orchards, tea gardens, factory warehouses, and other places.

Instructions for use:

1. Press the switch once. The product will beep and enter 24-hour audible and visual alarm mode. Simultaneously, the product will emit a slowly flashing red light for approximately 35 seconds (the product is in standby mode during this period and will not detect an alarm), then it will enter active mode.

2. Press the switch a second time. The product will beep and enter 24-hour silent flashing alarm mode (flashing only, no sound). Simultaneously, the product will emit a slowly flashing red light for approximately 35 seconds (during this period, the product is in standby mode and will not detect an alarm), then it will enter active mode.

3. Press the switch for the third time. The product will beep and enter nighttime audible and visual alarm mode (it does not operate during the day, only at night). Simultaneously, the product will flash red for approximately 35 seconds (during this time, the product is in the activation state and will not detect an alarm). It will then enter the activation state. 4. Press the switch for the fourth time. The product will beep and enter nighttime silent flashing alarm mode (only the light will flash, no sound). Simultaneously, the product will flash red for approximately 35 seconds (during this time, the product is in the activation state and will not detect an alarm). It will then enter the activation state. 5. Press the switch for the fifth time to turn off the product.

Tips: The ambient charging temperature is 0° to 50°C and the ambient discharging temperature is -10° to 50°C. If the temperature is too low or too high, it may not function correctly.