Outdoor solar-powered burglar alarm with independent strobe light and remote control included.

Product Description: This outdoor solar alarm system features a 129-decibel audible alarm and a flashing light signal, effectively deterring intruders and helping you protect your home. It offers four modes: 24-hour flashing alarm + siren; 24-hour flashing alarm (no alarm); 12-hour nighttime flashing alarm + siren; and 12-hour nighttime flashing alarm (no alarm). Simply place the solar panel in the sun for automatic charging during the day. This solar alarm is waterproof (IP65), has a robust housing, and can be recharged via a DC solar interface or a standard charger. It is suitable for securing homes, residences, farms, villas, hotels, markets, guesthouses, and any location requiring a security alarm. Functions: Alarm; Detection; Color: Red.

Note: When using the remote control, please first turn on the main switch located on the back (next to the additional charging port; charging cable not included). Alarm functions: Level 1: Day mode (24-hour audible and visual alarm), Level 2: 24-hour silent flashing alarm, Night mode (no alarm during the day, audible and visual alarm in the dark), Level 4: Silent flashing alarm. Detection angle: 125°. Full charge time: approximately 6 hours in full sunlight. A single charge provides 24 hours of battery life, or 30 days of use, for a total battery life of 365 hours. Suitable for farms, villas, orchards, tea plantations, warehouses, factories, and other locations.

Instructions for use:

1. Press the switch once.

The device beeps and activates the 24-hour audible and visual alarm. Simultaneously, a slow red flashing light illuminates for approximately 35 seconds (the device is then in standby mode and no alarm is detected), then it switches to active mode.

2. Press the switch again. The device beeps. 3. Press the switch again. The device beeps and switches to nighttime audible and visual alarm mode (inactive during the day, active at night). Simultaneously, the red light flashes for approximately 35 seconds (during which the device is active and no alarm is detected), then the device switches to active mode.

4. Press the switch again. The device beeps and switches to silent flashing nighttime alarm mode (flashing only, no sound). Simultaneously, the red light flashes for approximately 35 seconds (during which the device is active and no alarm is detected). The device then enters activation mode. 5. Press the fifth button to turn it off. Note: The ambient charging temperature is between 0°C and 50°C, and the ambient discharging temperature is between -10°C and 50°C. The device may not function correctly if the temperature is too low or too high. Note: All data is measured manually; please allow for a margin of error of 1 to 3 cm. Due to differences in lighting and screen settings, there may be a slight color variation; please refer to the product received.