Outdoor solar water pump for fountain, 1.5W solar water pump kit for pond and fountain with ground socket.

Solar Panel: 5V / 1.5W

Water Pump Output: DC 4.5-10V

Maximum Flow Rate: 150 liters/hour

Maximum Jet Height: 45cm

Included Accessories: Solar Panel, Water Pump, Other Accessories

Instructions for Use

1. Assemble the product as shown in the diagram.

2. Place the solar panel in a suitable location, ensuring it is not obstructed. The water pump will start within 3 seconds once the solar panel has received sufficient sunlight.

3. When first immersing the water pump, the flow rate may be insufficient due to air trapped in the impeller. It is recommended to connect the nozzle only after the pump is functioning correctly.

4. This product is a direct-drive solar water pump and does not include an external battery. The jet height depends entirely on the intensity of solar radiation. In low sunlight, the water pump will not operate continuously but will automatically restart several times until the solar radiation intensity reaches a certain level before resuming continuous operation. 5. The water pump must be fully submerged during use and should not be left dry for extended periods. 6. Please keep the water source clean and clean the pump regularly to prevent foreign objects from being drawn in and affecting its proper operation. Product Description: This product is a direct-drive solar water pump and does not require an external battery. The water column height depends entirely on the intensity of solar radiation. In low sunlight conditions, the pump will not run continuously but will automatically stop and restart until the solar radiation reaches a certain level, after which it will resume continuous operation. Important note: When testing or installing a solar fountain, the water pump must be submerged. This prevents the motor from burning out due to lack of water. Therefore, if the basin or pond is empty, it is essential to fill it quickly.