1/4
Overflow - Ribbed Fitting for Connecting Tanks and Overflows - 3/4" 26 mm x 25 mm (Pipe) - 2 Seals, for Water Tank, Barrel, Cistern - 1 Piece
Of which environmental contribution £0.10 including VAT.
Sold by Sinocor GmbH
You may also like
Compare with similar items
Product information
Description
General Description
This overflow is specially designed for 1000 litre plastic tanks (also called IBCs or GRVs) used for rainwater harvesting, storage and consumption. It attaches to the side of your tank and allows excess rainwater to drain from it.
Technical Specifications
Material: Polypropylene and polyethylene
Inlet: 1/2" male gas thread
Outlet: Straight end Ø 15 mm (outer diameter)
Drilling on tank wall (min/max): 20 mm / 25 mm
Weight: 19 g
Installation
To install the overflow, you need to drill a hole in your tank using a standard hole saw, with a diameter between 20 mm and 25 mm.
Use
This fitting is exclusively for use with water. It comes with a nut and two gaskets for easy installation.
Features
- BrandTEHTUY
- ColourBlack
- Pcs per pack1
- Warranty1 year(s)
- Connection configurationF-M-F
- Pipe thread size1/2" (15x21)
- Height1 cm
- Width1 cm
- Length1 cm
- MaterialPolyethylene
- Weight19 g
- Type of accessory for tankFaucet
- ManoMano ReferenceME98886582
- MMID661918985015
- Product codeZSino-06832
- EAN6240449305623
Advice from
Water butt buying guide
Cost-effective, environmentally friendly and easy to install, water butts offer a practical solution for anyone hoping to water their garden without increasing their water bill. Designed to be connected to a downpipe, water butts and underground water tanks can range from 300 to 5000 litres in capacity.
'/%3E%3C/svg%3E)
You are here:
'/%3E%3C/svg%3E){kind=small}