Pack of 10 Cherry MX red RGB low profile switches for key switches (DIY).

Features: Cherry MX Low Profile RGB Red Switch: Linear switching function with no pressure point, with a defined force of approximately 45 cN and no contact bounce. Supports 16.8 million RGB colors at high brightness (LEDs not included). SMD LEDs mounted directly on the PCB for cost-effective and fully automated production. High-precision mechanical switch with very low operating point tolerance. Exclusive Cherry Gold Crosspoint technology. Short bounce time for high switching frequencies (e.g., for fast typing). Self-cleaning contacts; dust and dirt resistant switch. Specifications: Technical data for Protection rating: IP40 Operating characteristics: Low profile, linear Switching voltage: 12 V AC/DC max. Dielectric strength: 500 V / 50 Hz Durability: > 50 million actuations Contact configuration: Single-pole contact Actuator travel: 3.2 ± 0.25 mm Pretravel: 1.2 ± 0.3 mm Initial force: 40 cN min. Actuation force: 45 ± 15 cN Bounce time: Typically 1 ms Minimum pin spacing: 16 mm Dimensions: Approx. 2 x 2 x 1.8 cm / 0.79 x 0.79 x 0.71 in. Illumination: SMD LED, mounted directly on the PCB Insulating materials: Thermoplastics Spring: Stainless steel Storage temperature: -40 °C to 70 °C Operating temperature: 5 °C to 40 °C Humidity: Storage: Medium < 50% max. Note: Please note that this product contains only Cherry MX Low switches; other components are not included. Due to manual measurement, please allow for a 0-1 cm error. Please make sure this is acceptable to you before bidding. Due to differences in monitors, the actual color of the item may differ slightly from the color shown. Thank you. Package includes: 10 Cherry MX Low switches.