Pack of 3 portable garage door transmitters 868.3 BS MHz - Compatible with HSE-4-868-BS, HSE2-868-BS, HS4-868-BS, HS1-868-BS, HSS4-868-BS, HSP4-868-BS - White

Compatibility: Our replacement garage door opener is compatible with Hörmann handheld transmitters HSE4-868-BS, HSE2-868-BS, HSE1-868-BS, HS5-868-BS, HS4-868-BS, HS1-868-BS, HSP4-868-BS, and HSS4-868-BS. Note: If your original remote is not listed, please do not purchase this remote. This is not the original remote; it is a replacement garage door opener. Two programming methods are available: copying the code from your original remote or programming via the receiver. Note: It features built-in scrolling codes (blue LEDs)! If your original remote uses fixed codes (red LEDs), it will not work. Garagento Remote Control Frequency: 868 MHz, blue LED indicator, 4 channels. Not compatible with remotes on other frequencies, even if they look the same. Mini BS 4-Button Handheld Transmitter - With a protective metal cover to prevent accidental button presses. It's small enough to be easily carried on a keychain, in a bag, or a backpack. Compatibility: Our replacement garage door opener is compatible with Hörmann handheld transmitters HSE4-868-BS, HSE2-868-BS, HSE1-868-BS, HS5-868-BS, HS4-868-BS, HS1-868-BS, HSP4-868-BS, and HSS4-868-BS. Note: If your original remote is not listed, please do not purchase. This is not the original remote; it is a replacement garage door opener. Two programming methods: copying the code from the original remote or programming via the receiver. Note: Built-in scrolling codes (blue LEDs)! If your original remote uses fixed codes (red LEDs), it will not work. Garage Remote Control Frequency: 868 MHz, blue LED light, 4 channels. Not compatible with remotes on other frequencies, even if they look the same. Mini BS 4-button handheld transmitter - With a protective metal cover to prevent accidental button presses. And it's small enough to be easily carried on a keychain, in a bag, or in a backpack. Note: Built-in scrolling codes (blue LEDs)! If your original remote uses fixed codes (red LEDs), it will not work. Compatible models: For Hormann HS1-868-BS. For Hormann HS4-868-BS. For Hormann HS5-868-BS. For Hormann HSE1-868-BS. For Hormann HSE2-868-BS. For Hormann HSE4-868-BS. For Hormann HSP4-868-BS. For Hormann HSD2-868-BS. For Hormann HSS4-868-BS. How to program: 1) Press and hold the button on the new remote. To program the code from your original remote, press and hold it. Press another button three times until the red LED light illuminates for 10 seconds, then release. 1) Press all buttons. 2) Place the original remote as close as possible to the left side of the new remote. 3) Press the button on the original remote. You must copy the code until the LED flashes alternately red and blue. Check that the LED on the new remote is flashing blue. If it isn't, try to move it as close as possible to the original remote. 4) When the blue light on the new remote is flashing rapidly, the learning process is complete. Release all buttons. 5) Please repeat the same procedure for the remaining buttons. Reset Method: Each button on the remote is assigned a new radio code by following these steps: (1) Remove the battery for 10 seconds. (2) Press and hold a button on the remote. (3) Insert the battery. The LED will flash slowly blue for 4 seconds. The LED will flash rapidly blue for 2 seconds. The LED will then remain solid blue. (4) When you release the button on the remote, all radio codes will be reset. reassigned. Note: If the remote control button is released prematurely, no new radio code will be assigned.