Pack of 50 Hot Glue Sticks 270 x 11 mm Extra Strong Automotive Body Glue Hot Melt Glue Stick for Glue Gun Dent Repair Car Fabric Plastic - Black

★PDR Glue Sticks---Professional paintless dent pullers won't damage the original paint and make the job easier.
Instructions for use:
1. Clean the dents with a clean, damp cloth. 2. Place the glue stick in the glue gun, pull the trigger to advance the stick, turn on the power, and allow it to heat up for 5 minutes. 3. Use an appropriate sealant. Large dents require wider sealants. (Note: the larger the sealant, the greater the extraction force). 4. Pull the trigger and apply the extruded glue to the extruded sealant (the 4 holes in the sealant must be coated with hot glue). 5. Use a hot melt adhesive to quickly place the tab in the center of the dent and press gently until the glue hardens and adheres (allow the glue to cool for approximately 8 minutes. Cooling time should be less than 10 minutes and slightly shorter in winter). 6. Align the repair patch with the hot melt adhesive and pull the tab back to pull the dent out. 7. Check with the circuit board. If the dent is still present, gently tap with a flat hammer or pen. 8. Clean the repaired area with a clean, damp cloth. ☛Use and Care: Wipe away water, dust, or other impurities from the item before applying. Please wait patiently until the adhesive solidifies after 24 hours, instead of immediately shaking the glued items. Do not touch the skin with the hot melt adhesive to avoid burns. If you accidentally touch the skin, immediately rinse it with cold water and consult a doctor immediately. (Do not peel hot particles off the skin during this process).
Features:
Dimensions: 270 x 11 mm. Contents:
50 PDR adhesive sticks