Pack of 50 hot melt glue sticks, 270 x 11 mm, extra strong adhesive for bodywork, compatible with glue gun, dent repair, fabric and plastic, black.

★Paintless Dent Repair Glue Sticks: These professional paintless dent repair glue sticks won't damage the original paint and make the job easier. Instructions for Use: 1. Clean the dents with a clean, damp cloth. 2. Place the glue stick in the glue gun, pull the trigger to insert it, turn on the gun, and let it heat up for 5 minutes. 3. Use a suitable glue stick. Larger dents require wider sticks. (Note: The wider the stick, the greater the pulling force.) 4. Pull the trigger to apply the hot glue to the stick (all 4 holes in the stick should be filled with hot glue). 5. Quickly place the tab in the center of the dent with the hot glue and press lightly until the glue hardens and adheres (allow the glue to cool for approximately 8 minutes. Cooling time should not exceed 10 minutes). 6. Align the T-shaped repair rod, remove the washer with the hot glue, and pull the slider back to straighten the dent. 7. Check the circuit board. If the dent persists, gently tap it with a flat mallet or pencil. 8. Clean the repaired area with a clean, damp cloth. ☛Use and Care: Clean the object of any water, dust, or other contaminants before installation. Wait 24 hours for the glue to harden before shaking the glued objects. Avoid contact of the hot glue with the skin to prevent burns. In case of accidental skin contact, rinse immediately with cold water and consult a doctor. (Do not remove hot particles from the skin.) Features: Dimensions: 270 x 11 mm. Contents: 50 PDR glue sticks