Pack of 500 3mm Leveling Strips for Installing 1-4mm Tiles, Transparent - LIAIKI

500-piece 3mm tile laying system Lay tiles easily, quickly, and precisely without overlapping. Suitable for small tiles, especially large format tiles. The clip tears off the underside of the tile, creating a forced tear edge, so nothing protrudes into the grout line during grouting. For laying ceramic tiles, fine stone slabs, granite slabs, and marble, for laying large and small flat and straight surfaces on floors or walls. Can also be used on uneven surfaces. Product Description Simple and precise Lay tiles easily, quickly, and precisely without overlapping. Suitable for small format tiles, especially large format tiles. The clip tears away from the tile; this is called a forced tear edge, so nothing protrudes into the grout during grouting. Easy and quick to use. Used by both DIY enthusiasts and professional masons due to its simple and effective operation. For laying ceramic tiles, fine stone slabs, granite slabs, and marble slabs, for laying small and large flat and straight surfaces on floors or walls. Can also be used on uneven floors, such as in older buildings. This means you can compensate for irregularities. Excellent value with no effort. Not only are our tiling aids inexpensive, but they also reduce your workload because there's no need to add shims to the joints. Versatile, clean, and smooth. Tile leveling systems are suitable for small-format tiles, especially large-format tiles, as these large slabs are not easy to straighten. The pull tab tears away from the underside of the tile, creating what is called the forced break edge, so that nothing protrudes into the joint during grouting. Developed in collaboration with craftsmen. Our tile inlay systems are designed in collaboration with tile installers and are continuously improved and refined. The optimization process is seamless, and we always ensure that all updates are compatible with previous versions. The bonding aids use 1, 1.5, 2, 3, 4, and 4 mm wide XXL pull-ring connectors for tiles 13 to 22 mm thick, reusable shims, and adjustable two-axis mounting clips. Here's how it works Step 1 Please insert the pull ring under the floor tile. Make sure there is no tile adhesive on the tongue. Second step Insert the spacer into the protruding part of the tongue. Make sure the spacer is not pushed in too far. Step 3 Now secure the spacers using special pliers and push them firmly so that both tiles are level. Step 4 Once the tile adhesive has dried, the pull tab will be pushed back with your foot to the breaking point.