Parallel guide rail system, aluminium alloy, rustproof and wear-resistant junction set for circular saw

Features:

1. Versatile: This guide helps you guide wood during sawing and safely and easily on planers, moulders, table saws, or wood pickers.
2. Easy to Use: The parallel rail limit block can be adjusted by loosening the large screw and then the small screw, allowing the limit block to be adjusted left and right.
3. Aluminum Alloy Material: The circular saw fixed guide is made of aluminum alloy, which is wear-resistant, durable, and won't get dirty or discolored.
4. Clear Scale: The precision-machined drill guide kit features a precision scale on the body that can be adjusted to the thickness of the board.
5. Reasonable Design: The back plate is smooth and won't jam, improving your work efficiency. The locking design allows you to set the cutting distance with a single wrench to reduce operating errors.

Specifications:

Item Type: Parallel Guide Rail System
Material: Aluminum Alloy
Guide Rail: Approx. 300 mm / 11.8 in/piece
Guide Rail Clamping Angle: 90°

How to Use:

How to install the rail connection device? 1. Screw the O-screws onto the short and long bars respectively. 2. Connect the long Phillips head screws, the connecting plate, and the slider in that order. 3. Connect the ladder bar in order with the short bar, then install the limit stop, the stainless steel bar, and the end cap. 4. Secure the circular saw guide and the parallel guide with short Phillips head screws. 5. On the other side, following the order above, you can complete the splicing.

Package List:

8 x guide rails 2 x sliders 4 x limit stops 6 x sliding blocks 2 x connecting plates 16 x screws 4 x end caps 4 x nuts 4 x gaskets