Parallel rail guide system, aluminium alloy circular saw, universal woodworking tool kit

Features:

1. Aluminum Alloy: The parallel guide rail is made of high-quality aluminum alloy, offering high hardness and durability. The parallel guide rail has a smooth surface, is not easily bent or broken, and can be used with confidence.
2. Easy Adjustment: The limiter and guide rail of the parallel rail can be adjusted. Rail sections can be joined to form the maximum rail length. The parallel rail stop is adjustable. First, loosen the large screw, then the small screw to adjust the limit block left and right.
3. High Precision: This aluminum alloy parallel rail adopts a splice-type slide with a large screw contact area. The wrench can pass through the screw to estimate the position, and the rail will not protrude during operation. The scale on the tool is clear, and the measured values ​​are easy to read, adding convenience to reading and operation.
4. Wide application: The aluminum parallel guide rails guide the wood during sawing and wind easily and securely, quickly attaching to the guide rails of planers, forming machines, table saws, or log pickers for safe and high-precision cutting.
5. Reasonable design: The back plate is smooth and jam-free to improve your work efficiency, and the locking design allows you to set the cutting distance with a single wrench to reduce operating errors.

Specifications:

Item Type: Parallel Rail Guide System
Material: Aluminum Alloy
Rail Piece Length: Approx. 300 mm / 11.81 inches
Rail clamping angle: 90°

How to use:

1. Screw the O-ring screws onto the short and long pieces respectively. 2. Connect the long Phillips head screw, the connecting plate, and the slider in sequence. 3. Connect the scale bar with a short piece in the following sequence: 197 to 497 mm, 497 to 797 mm, 797 to 1097 mm, 1097 to 1397 mm, then install the limit block, the stainless steel piece, the blue plastic cap, and the stainless steel cap. 4. Secure the circular saw guide rail and the parallel guide rail with short Phillips head screws. 5. Follow the order above on the other side to complete assembly.

Package List:

8 x Guide Rail

2 x Connecting Plate

4 x Limiter

8 x Phillips Head Screws

16 x O-ring Screws

8 x Sliding Bar

1 x Wrench

1 x Phillips Head Wrench

2 x Sliding Rods

>2 x Blue Plastic Caps

2 x Stainless Steel Caps

4 x Washers

1 x User Manual