Pcs Workshop Stand Adapters for Universal Motorcycle Rear Stand 20 X 20 X 118 mm Lifting Bracket Swingarm Screw for Motorcycle, U-Shaped

CONTAINS - 2 x U-shaped stand adapters | Material: Galvanized iron, rust and corrosion resistant | Square shaft size: 20x20x118mm | This product can be used directly to replace old or damaged rear tire motorcycle stand adapter parts, perfectly matching the original parts. L-SHAPED ACCESSORY - Equipped with non-slip black rubber pads that securely hold the swingarm in place, allowing the motorcycle to operate without slipping or fraying. EASY TO USE - Easily attaches to jack stands and also fits various sized motorcycle swingarms, making jacking easier and improving maintenance efficiency. HIGH STRENGTH - With a load capacity of up to 400 kg, heavy motorcycles can be easily supported. Whether it's a touring motorcycle, a road bike, or a powerful road bike, it will remain stable thanks to its support. OUR SERVICE - If you have any dissatisfaction or suggestions regarding our products, please feel free to contact us, and we will provide a satisfactory answer and solution. TIPS: 1. Please check the product size before placing your order, thank you. 2. As the product size is measured manually, there will be a slight deviation of 1-3mm; thank you for your understanding. 3. Due to differences in monitors, mobile phone pixels, and lighting, slight color variations are inevitable. The actual product color may differ slightly from the image shown. If you have any dissatisfaction or suggestions regarding our products, please feel free to contact us, and we will provide a satisfactory answer and solution.